Page 51 - Big End Performance 2014

MASTER POWER DISCONNECT SWITCH
- Required in all categories of racing to cut the main power supply between the battery and the electrical system
- NHRA and IHRA approved
- A quick-twist/non-slip lever provides a
fast power cut-off. Rated at 175 amps
continuous; 1,000 amps intermittent - Fits panels up to 3/16” thick
BEP50030 Master Power Disconnect Switch, Single Pole (Battery Only)
BEP50031 Master Power Disconnect Switch
for Vehicle with an Alternator Charging
System. Double Pole
ON-OFF FACE PLATE
BEP50035 On-Off Face Plate
CHROME GM ALTERNATORS
- Chrome plated GM Delco-Remy, new or rebuilt alternators
- 1 or 3 wire hookup
- 100% new components,
- Built-in voltage regulator
BEP50051 BEP50050 BEP50055
65 amp Alternator 100 amp Alternatortor 140 amp Alternator
REMOTE-MOUNT ALUMINUM BATTERY BOX KIT
- Allows you to move your battery to the trunk for better weight transfer.
- Kit comes complete with battery box, hold downs, and battery cable.
BOLT-ON BATTERY BOX
- Die formed steel; Lightweight yet strong.
- Variety of mounting holes
- Includes pivoting hold down bolts, lock nuts, & aluminum
hold down strap.
- Dimensions are 11” X 7” inside.
BEP58110 Adjustable Tray
BATTERY CABLE END DISCONNECT SWITCH - 100 amps rated, for 12
or 24 volt systems
BEP50044 Cable End Disconnect Switch
THRU-PANEL BATTERY CONNECTOR
- Can be used to provide a solid connection through firewall or any panel
- 1-1/4” diameter hole, Sold each
BEP50045 Thru-Panel Battery Connector
REMOTE BATTERY JUMPER TERMINALS
- Allows battery to be placed anywhere in the vehicle
- Sold separately
BEP50040 Red (Positive) BEP50041 Black (Negative)
BEP58100
Aluminum Battery Box Kit
50
GM ALTERNATOR PIGTAIL ASSEMBLY
- Clips on the alternator terminal just like stock and will NOT vibrate off
- Will allow you to use 1-wire alternators just like stock - Works with GM 10SI and 12SI series alternators
BEP54110 GM Alternator Pigtail Assembly
XHD MASTER DISCONNECT SWITCH
- This switch is compatible with both 12 volt and 16 volt systems and is rated at 300A
continuous and 2000A momentary
- Switch requires a 3⁄4” mounting hole and has 1⁄2” terminals. Faceplate available separately
BEP50032 XHD Master Disconnect Switch BEP50036 Faceplate for XHD switch
CIRCUIT BREAKERS
- A circuit breaker, unlike a fuse, can be re-used after an overload
BEP52060 BEP52061 BEP52063
40 Amp Breaker 30 Amp Breaker 20 Amp Breaker
ELECTRICAL QUICK CONNECTS
- Kits include two genderless housings and four contact terminals
- Terminals can be crimped or soldered on
BEP54200 Quick Connect 1/0 AWG, to 175 amps BEP54210 Quick Connect 6 AWG, to 50 amps
STUD TYPE
REMOTE BATTERY JUNCTION BLOCKS
- Kits include one Positive (Red) and one Negative (Black) terminal block with either
a 3/8”, or 10-32 studs that allow for the connection of battery cables through a bulkhead
BEP50070 BEP50071 BEP50072 BEP50075 BEP50076 BEP50077
3/8” Junction Block Kit 1 Positive 1 Negative Replacement 3/8” Junction Block Negative (Black) Replacement 3/8” Junction Block Positive (Red) 10-32 Junction Block Kit 1 Positive 1 Negative Replacement 10-32 Junction Block Negative (Black) Replacement 10-32 Junction Block Positive (Red)
ELECTRICAL