|
EcoBoost Power Package On Sale! |
 AFE54-12192
Air Intake System,
Pro 5 R Filter
12-13 F-150 EcoBoost 3.5L V6
|
AFE54-12192
$296.01
Each!
31% Off
Jobber! |
aFe's Stage 2 air intake system produces
an astonishing 32 horsepower and 35lbs. x ft.
torque and outflows the factory intake by 44%!
This intake is the most sophisticated design on
the market today. Our equal length dual tube
design with H-pipe balance-tube increases intake
air flow and velocity while increasing
horsepower and improving throttle response.
Allowing for quicker turbo spooling. The air
intake is enclosed in a durable 16-gauge heat
shield that utilizes the lower half of the
factory air box that requires no assembly. Two
360 degree conical Pro 5R air filters provide
protection and flow for maximum performance and
are constructed with 100% polyurethane for long
life and multiple cleaning cycles.
Equal
Length Intake Tube - This intake uses a dual
intake tube design with an H-Pipe balance tube
to balance intake tube pressures and maximize
air flow and velocity.
Dual 360 Degree
Air Filters - This intake utilizes dual oval
conical Pro 5R performance air filters for
maximum flow. This 5-layer progressive, oiled
cotton gauze air filter provides maximum flow
for increased horsepower and torque.
Top
Mounted Heat Shield Design - aFe developed this
heat shield to snap onto the top of the lower
half of the factory air box to provide a
hassle-free installation utilizing factory
mounting locations. |
 |
 AFE77-43005
SCORCHER Tuner
Module
11-13 F-150
EcoBoost 3.5L V6 (tt)
|
AFE77-43005
$199.20
Each!
20% Off
Jobber! |
A simple 5 minute install for less than
$250 gains you over 40HP! The aFe Power SCORCHER
Module is designed to alter the pressure sensor
signals to increase boost to an optimum level
throughout the entire RPM range. The result is
increased performance and improved throttle
response across a broad power band as well as
reduced turbo lag. In recent testing these
modules produced up to 47 horsepower and up to
57 lbs. x ft. of torque.
Direct Plug In
Power: This simple and safe plug and play module
adds instant power by altering pressure sensor
signals to increase boost to an optimum level
throughout the entire RPM range.
Blue
L.E.D. Power light: This module comes with a
built-in blue L.E.D. light to show your module
is powered up and functioning correctly.
High Precision and Reliability: SCORCHER modules
are 100% tested, have output protection on all
signals and are built to a 0.1% tolerance on
components in critical areas. Signal filtering
is used for a smooth response. These modules
work great on vehicles in stock trim but are
optimized to maximum performance with use of aFe
Power performance parts (intakes, filters,
exhaust, etc.).
High Quality Materials:
aFe SCORCHER modules use OE style "all weather"
connectors which require no modification to your
factory harness, providing a secure
factory-style fit and hassle-free installation.
The housing is constructed of aluminum with a
hard coat black anodized finish and uses
Automotive grade TXL wire with high heat and
chemical resistance. SCORCHER Modules come with
a 2-year limited warranty. |
|
|
 AFE49-03041-B
ATLAS 4"
Aluminized
Cat-Back
Exhaust System with Black
Tip
11-13 F-150 EcoBoost 3.5L V6 (tt)
|
AFE49-03041-B
$299.25
Each!
25% Off
Jobber! |
This ATLAS Cat-Back exhaust system is
constructed of 4" mandrel-bent aluminized steel
and comes complete with free-flowing muffler,
tubing, OE style bayonet hangers, band clamps
and all hardware necessary for a hassle-free
installation. The smooth curves and increased
diameter of this exhaust system helps remove
restriction and keeps exhaust gas flowing
smoothly for increased horsepower and torque.
The system is finished off with a aggressive
black 304 stainless steel, rolled slash cut tip
for an aggressive style.
Installation is
a Snap: This Atlas uses all factory-mounting
locations providing stability and a hassle-free
installation.
Leak-Free Seal: High
quality OE style flange and band clamps are used
for a complete 360-degree sealing surface
eliminating leak paths.
Aggressive Sound:
A straight through designed, free-flowing
aluminized steel muffler is used to absorb high
pitch tones producing a powerful sound and
unleashing all available horsepower and torque
out of your rig.
Perfect Fit: OE style
bayonet hangers are used to maintain a stable
pipe location during high vibration and high
heat conditions. The bayonet tip holds the
hanger bushing in place for an OE style fit that
does not change with time.
Flow and
Performance: Atlas exhaust systems are
constructed of 4" mandrel bent aluminized steel
tubing for maximum flow. Smooth transition bends
allow for low turbulence, increasing horsepower,
torque and improving throttle response. |
Join Meyer on the leading edge of technology and
manage your account online! The Meyer Online Account
tab enables you to view your open invoices and
statement with just the click of a button. Tired of
paper messes piling up on your desk? Meyer Online
solves this problem and helps you save time and
money by having all of your account needs displayed
in real-time. Contact us today or include a note
with your next statement to go paperless!
PUT230400D
TER4838100
TER1255200
Meyer Distributing Announces Shreveport, LA
Location
Meyer
Distributing Announces Iowa City, IA Location
Manufacturer Price Updates
Meyer Online: Your FREE Internet Portal