Meyer Online

Exigir que los fabricantes de RMA

Varios fabricantes requieren campo de RMA (Autorización de Devolución del Fabricante) y / o la documentación correspondiente para solucionar problemas y / o cuestiones de procedimiento relacionadas con la garantía y deberá ser contactado directamente por el cliente. Al ponerse en contacto con el fabricante para recibir RMA, los clientes se les aconseja para proporcionar el fabricante con el comprobante de compra, y su información de contacto completa, incluyendo nombre de la empresa, persona de contacto, número de teléfono, dirección de correo electrónico, etc. así como el primer nombre y apellido / contacto información de su representante de ventas de Meyer o de la persona punto de retorno. Las solicitudes de devolución directa con el vendedor y / o Meyer puede requerir información adicional, como prueba de compra dentro de la línea de tiempo de garantía y proporciona imágenes de las piezas que necesita ser devuelto. Las Reclamaciones por Caños ocultos deben proporcionar imágenes de las condiciones de embalaje y el producto con solicitud de devolución.

A continuación se muestra la lista actual de los fabricantes que requieren que el cliente pueda ponerse en contacto directamente con el vendedor para solucionar problemas en el campo. RMA debe ser aplicada en el campo a nuestro cliente oa petición de Meyer Distributing. El RMA es la autorización para regresar la pieza(s) para la revisión de garantía y no constituye un crédito de garantía. Partes que faltan no constituyen un problema de garantía y debe ser manejado en el campo. NUNCA devolverá el depósito de combustible usado o tanque de transferencia que previamente contenía materiales peligrosos (incluyendo el combustible) en ellos. Vendedor deberá facilitar campo destruir o recoger el combustible utilizado o tanque de transferencia.

Columna "Fabricante" es un enlace a los sitios web respectivos. La columna "Código" se refiere al código adecuado dentro del sistema de ordenación de Meyer Distributing y la columna de "Productos" es una breve descripción de la línea de productos. Se refieren a la parte inferior de la parrilla para la exportación a Excel.

Fabricante RMA Red

AVISO: Sólo los campos aplicables se rellenará - Los requisitos varían según el proveedor. Faltan partes componentes deben ser abordados en el campo. Las piezas con cualquier adhesivo / cinta debe estar en DRY FIT antes de instalar o puede anular la garantía.
FabricanteCódigoMétodoContactoTeléfonoEmailDoc
3-D MatsDDDRMA REQUIRED ALONG WITH PHOTO AND ORDER INFORMATION FOR WARRANTY CLAIMS. VENDOR RESERVERS THE RIGHT TO REPAIR OR REPLACE THE PRODUCT.  EmailEnlace
AccelAPGTroubleshoot in field. See vendor website for warranty policiesCustomer Service800.638.0032EmailEnlace
Access Bed CoversACC* RMA is required and can be obtained by the customer.Serial # will need to be provided when requesting RMA. DO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns ACI warrants ACCESS® Brand Roll-Up Covers to be free from defects in workmanship as follows: • ACCESS® Limited Edition, ACCESS® Original, ACCESS® LORADO®, and ACCESS® Toolbox Edition Roll-Up Covers have 5 Year Limited Warranties. • LITERIDER® and VANISH® Roll-Up Covers have 3 Year Limited Warranties. • TONNOSPORT® Roll-Up Covers have a 2 Year Limited Warranty 7019529963EmailEnlace
AccraACRField RMA required and can be obtained by Meyer Returns Support. CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Pictures may be required. * 2yr. warranty limitCustomer Service574.522.8382 or 574.370.2804EmailEnlace
Addictive DesertADDMEYER REP must contact vendor for Field RMA. Serial # REQUIRED for returns. CUSTOMER should contact vendor on FINISH ISSUES, these will be reviewed vendor (3 repair quotes may be requested)Sam480.671.0820EmailEnlace
Advanced Accessory ConceptsACOcustomer must contact vendor directly for any warranty or install issue.  EmailEnlace
Advanced Engine ManagementAEMDO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns.Customer Service800.858.3333EmailEnlace
Advantage Truck AccessoriesTRZFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. Vendor may coordinate the pickup direct or send replacements.John Soper800.773.3110EmailEnlace
AeromotiveAEODO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns. FIELD RMA to be obtained by the end user and this is advised with the instructions with the part.Jarrod913.647.7300EmailEnlace
aFe PowerAFE*FIELD RMA REQUESTED AND CAN BE OBTAINED BY CUSTOMER OR MEYER. *TROUBLESHOOT IN FIELD. *DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. *CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD.Customer Service951.493.7100EmailEnlace
Air Lift CompanyALC6/8/22 RMA not required. If Meyer carries the replacement pieces customer can reorder and we will do the return for just that piece of the kit. If we do not carry the replacement piece we can reach out to the vendor for it or the ENTIRE kit may be replaced and defective returned. CUSTOMER must contact vendor (Tech Support) for any INSTALLATION issues or missing partscustomer service800.248.0892EmailEnlace
AiraidAIRFIELD RMA REQUIRED - CUSTOMER must contact vendor for any INSTALL, WARRANTY, or DEFECT claim. Items under $10.00 Meyer cost and chemicals are not returnable for credit. Tim Inglee National Account Manager K&N EngineeringCustomer Service800.498.6951EmailEnlace
AirbedzABZDAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD.  EmailEnlace
AirDog / Diesel RxADGFIELD RMA REQUIRED. The customer should call VENDOR technicians and they will be able to take care of the customer. They would decide if the pump is under warranty or if they will have to purchase a replacement. Customer must supply serial at time of return request. The vendor will facilitate the pick up of parts as needed. Customer is required to troubleshoot in field. Vendor may request additional information such as pictures to determine if part can be addressed in field or returned to vendor direct. Replacement(s) will be sent to customer and should not be returned to Meyer for credit.Janet McCallister 877.421.3187EmailEnlace
Airxcel-ColemanCMNCustomers may not return any merchandise without first obtaining written authorization from Airxcel. Photos Required. sgokie@airxcel.com or mbenedict@airxcel.comSteve Gokie EmailEnlace
Airxcel-Maxx AirMXACustomers may not return any merchandise without first obtaining written authorization from Airxcel. Photos required.mbenedict@airxcel.com or sgokie@airxcel.comSteve Gokie EmailEnlace
Airxcel-SuburbanSBNCustomers may not return any merchandise without first obtaining written authorization from Airxcel. Photos required.mbenedict@airxcel.com or sgokie@airxcel.comSteve Gokie EmailEnlace
Al's LinerASCFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. Vendor may coordinate the pickup or replacement direct. * IF SEAL IS BROKEN RMA IS REQUIRED * 1 YR. product self lifeDana - Tech Support800.999.6841EmailEnlace
All SalesALSTroubleshoot in field. Vendor may want to facilitate from the field. SEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. SUPPLY PROOF OF PURCHASE. INVOICING & SHIPPING DISCREPANCIES EMAI INVOICE@READYLIFT-AMI.COMRyan Cragun916.933.0236EmailEnlace
Alliance AudioALNMust have serial number for return of audio.  EmailEnlace
AlphaRex USAALRProof of defect is required through pictures or videos via email. Products that are returned but do not exhibit the described reason for return may be declined for return (i.e. a tail light not turning on but tested in our facility and works properly without any issues; the underlying issue may be an installation error).Brandon Horgan EmailEnlace
Alpine AudioAPNCUSTOMER MUST CONTACT VENDOR DIRECTLY  EmailEnlace
Aluminum Tank Industries, Inc.ATI* 15% RESTOCK FEE ON TOOLBOXES/BUMPERS/GR.GUARDS * WARRANTY RETURNS REQUIRE SERIAL NUMBER/PICTURES - NO RETURN FOR USED TANKSRobert Mason863.401.9474 ext 13EmailEnlace
American BrassAMBrequesting a return for defective product, please direct dealers to fill out the return request form @ www.rvfaucets.com under the “help tab”. Replacement for defective product is limited to replacement of parts only, unless otherwise communicated to dealer.  EmailEnlace
American International InstallAIIMeyer can bring the part back after acquiring the serial number and will then get return authorization to send back to vendor. Must have serial number for return of audio (serial number placement, small clear sticker with black lettering)  EmailEnlace
American Racing WheelsARWRMA REQUIRED  EmailEnlace
Amp ResearchAMP* Customer must contact vendor to TROUBLESHOOT any WARRANTY, FIT, or INSTALL issues. NO FIELD RMA REQUIRED ON FINISH ISSUES---WARRANTY claims require pictures as well as a copy of their invoice. MISSING PARTS OR WARRANTY OTHER THAN FINISH * go to https://www.amp-research.com/warranty-information to complete the warranty informationCustomer Service888.983.2204 x14180 or CSR x41EmailEnlace
Amp TiresAMTRMA required for any warranty issue vendor will need the following information: •Year/Make/Model of the vehicle •Original sales receipt with mileage from time of installation •Current receipt of inspection report, showing current mileage •Rotation receipts showing mileages at time of service •Tread depth of all 4 tires, measure in 32ndsBlake or Chance EmailEnlace
Anzo, UsaANZCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. MEYER REP may contact vendor via EMAIL for Field RMA for Special Order items. * 1 YR.WARRANTYReturns888.360.3696EmailEnlace
AP Exhaust ProductsAPETroubleshoot in field. Field RMA required. Customer must contact John @ APE and provide Part #, Serial #, what error code and reason for return, Emissions Form(s),Warranty card and pictures as required. If parts have been altered/modified it may void the warranty. This will include mufflers with hangers installed. All fit issues will also need follow the Field RMA requirements.John Tillich800.27.7287 x2438 or 219.613.1EmailEnlace
AP ProductsAPPCustomer to contact vendor directly for any warranty issues. Do Not Return to MeyerDaren Rathbun or Chris Rollins5172788521EmailEnlace
APRAPHTroubleshoot in field. Meyer Rep must contact vendor to get Field RMA. Holley carries a 90day warranty (see vendor website for additional warranty policys. Vendor will advise freight account # to ship parts back to the vendor direct from the customer. BEP Holly Carbs & pumps 90 days with product replacement no credit. Troubleshoot in field and field RMA can be obtained by Meyer Rep with a call tag pick up from the customer. Contact is Customer Service 1-800-638-0032Customer Service800.638.0032EmailEnlace
ARB Usa/Old Man EmuARB* FIELD RMA REQUIRED CUSTOMER MUST CONTACT VENDOR DIRECTLY, must include pics of the item as well as the original packaging. * Must have detailed information as to the reason for return, what vehicles they were ordered for. * CUSTOMER must contact vendor for any MISSING PARTS, WARRANTY or DEFECT claim. * 15% RESTOCK FEE ON SOME ITEMS OF THIS LINE *Customer Service866.293.9078EmailEnlace
Area Diesel Service, IncARERMA is required. Meyer is to contact vendor for RMA number All cores need to be sent back to back to the address below. Please make sure to enclose either a Meyer invoice or the Meyer core form. Core Collections 303 Carlinville Plaza Carlinville, IL 62626Customer Service EmailEnlace
AriesARI6/8/22 RMA not Required * Pictures must be request. * 3 YR ON BLK. POWDER COAT * 5 YR ON ALUMINUM FINISH * STAINLESS LIMITED LIFE FOR NORMAL WORKMANSHIP/DEFECT *Stainless Steel Limited Lifetime Warranty Aries Offroad offers the original purchaser a limited lifetime warranty from defects in material and workmanship. This warranty does not cover shipping damage, misuse, mishandling, road hazards, product modifications, or discoloration. This warranty does not cover cost for installation, removal, labor or shipping. This warranty only applies to new products installed on the original vehicle. If you live in an area that uses salt or other harsh chemicals for snow and ice removal, it is very important that you keep your bars clean. If you allow salt and other harsh snow and ice removing chemicals to stick to your step bars, this may cause your bars to rust prematurely and will void your warranty (warranty will be voided under product neglect) PLEASE KEEP YOUR STEP BARS CLEAN OF SALT AND OTHER SNOW REMOVING CHEMICALS.returnsdepartment@curtgroup.com8772878634EmailEnlace
Arrow Storage ProductsASI* Troubleshoot in field. RMA is NOT required. * Contact vendor for missing parts. * Standard, electro-galvanized steel buildings carry a limited 12 year limited warranty. * Premium, vinyl-coated electro-galvanized steel models have a limited 15 year warranty ** SEE VENDOR WEBSITE FOR PRODUCT INFORMATION, WARRANTY POLICY AND TERMS http://www.arrowsheds.com/shedsupport/warrantyinformation.html. ** Proof of Purchase required * DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. * CONCEALED DAMAGES MUST BE REPORTED TO VENDOR.Chrissy Deien800.851.1085EmailEnlace
ASA Electronics/Advent Air/Voyager/Jensen RV-Marine/Polk/KlipschASATroubleshoot in the field. Field RMA required and can be obtained by the customer with ASA Tech Support. ** Do not return to Meyer. Vendor will facilitate the return in the field. vendor will handle any returns, inspect, and will ONLY send replacement parts See vendor website for additional warranty policies and procedures http://www.asaelectronics.comTech/Return Support800.688.3135EmailEnlace
ATI Super DamperASDTroubleshoot in field. Field RMA required via Meyer Returns. DO NOT CREDIT TILL VENDOR CREDIT IS RECEIVED  EmailEnlace
ATS DesignCRDFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. Do Not return to Meyer. 866.213.2873EmailEnlace
ATS Diesel PerformanceATSDO NOT RETURN PRODUCT TO MEYER. Vendor will REQUIRE a Field RMA for customers to return warranty items from the field. Serial # will be needed (if applicable) on Transmissions (passenger side bell housing), Torque converters (impeller side top) & Co-Pilots (controller box plug bezel).Customer Service or Tech Support303.431.7973EmailEnlace
Atturo Tire CorporationATC* CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. * For WARRANTY CLAIMS Customer MUST complete & submit to Meyer Rep the ATC Claim Form (See linked document). 3 Photo's will be required and must be numbered and linked to each tire on the Atturo form. 1. Photo of Tread 2. Picture of Defect area. 3. Pic of DOT # (with date code). * 3yr. Warranty (prorated) **on Prorated parts CREDIT WILL NOT BE ISSUED UNTIL RECIEVED BY THE VENDOR 847.265.6146EmailEnlace
Auburn GearAUB* Troubleshoot in field. * Field RMA required via Meyer Returns. * Forward the required attached form to Meyer Returns Support when requesting RMA for warranty return. * DO NOT CREDIT TILL VENDOR CREDIT IS RECEIVEDAaron Binegar260.920.3512EmailEnlace
Audio ControlADCMeyer can bring the part back after acquiring the serial number and will then get return authorization to send back to vendor. Must have serial number for return of audio (serial number placement, small clear sticker with black lettering)  EmailEnlace
Auto MeterATMMust provide detailed description of issue, Meyer will contact vendor for an RMA. Must include sales receipt with return.  EmailEnlace
Auto VentshadeAVE6/7/22 - RMA not required. Photos of damages/warranty not require. May be returned to Meyer. Limited life time warranty  EmailEnlace
Automated Products InternationalAPICUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. 800.220.1843EmailEnlace
B & M AutomotiveBAMTroubleshoot in field. Field RMA required and can be obtained by Meyer Returns Support. Carries a 90 warranty Pictures maybe required. See attached warranty guidelines or vendor website for any updates on warranty guidelines and procedure.Customer Service/Tech Support707.544.4761EmailEnlace
B & W Trailer HitchesBNWFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. ** ANY OPENED BOX IS NOT RETURNABLE - * Missing Parts - In the event that there is a missing part, contact B & W at 800-248-6564. We will ask for a date code on the box or boxes, what condition the box is in (is it torn up), and what color of packing tape is on the box. B & W will only send out parts at no charge with proper date code information, if there is no date code parts can be sent but will be charged to customer’s account in accordance with B & W’s standard payment terms. B & W will only be responsible for damaged boxes that are sent directly from B & W to dealer/distributors. * Warranty Returns - Products to be returned for warranty coverage must have an RMA number given by B & W and be within the applicable warranty period. If within warranty period B & W will ask for the part to be received at our facility, call tags may be sent to customer to get part back. Then B & W will then make the decision to send out replacement part(s) or credit accordingly. * Non-Warranty Returns - If the customer decides to return a product for repair that is no longer in the specified warranty period or has damage not covered in specified warranty, customer will send product, B & W will evaluate the damage and contact customer to inform of what needs to be done before any work is done. 800.248.6564EmailEnlace
BackrackBCKTroubleshoot in field. Field RMA is Required. Photos of defect required BACKRACK's responsibility is strictly limited to repair or replace the product. Powder coat finish is not covered under warranty. SEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD. 800.265.8137EmailEnlace
Baer Brake SystemsBAETroubleshoot in field. Meyer Rep must contact vendor to get Field RMA. Holley carries a 90day warranty (see vendor website for additional warranty policys. Vendor will advise freight account # to ship parts back to the vendor direct from the customer. BEP Holly Carbs & pumps 90 days with product replacement no credit. Troubleshoot in field and field RMA can be obtained by Meyer Rep with a call tag pick up from the customer. Contact is Customer Service 1-800-638-0032 Classic Instruments Returns Ship To Location: Classic Instruments 826 Moll Drive Boyne City, MI 49712Customer Service800.638.0032 option 3EmailEnlace
Baja DesignsBAJRMA REQUIRED, CUSTOMER MUST CONTACT VENDOR DIRECLTY FOR ANY WARRANTY/DEFECTIVE ISSUE.MUTS PROVIDE COPY OF INVOICE. ITEM MUST BE RETURNED DIRECTLY BACK TO VENDOR ONCE RMA IS PROVIDED.  EmailEnlace
BAK IndustriesBAKCustomer must contact BAK Industries directly for Field RMA NO warranty product can be returned without an RMA from the vendor. SERIAL number MUST be provided for ALL returns. And must be verified that it was purchased by Meyer Proof of purchase provided to Meyer. Product can be returned via Meyer. ** CUSTOMER MUST PROVIDE Pictures to obtain the RMA as well as pictures of the Field Destroyed part(s) once the Field Destroy RMA is obtained prior to credit being issued. Customer must advise part #’s for cover and rails for multiple boxed parts and return both the rails and the cover to with the FIELD RMA & SERIAL # to receive full credit.Customer Service818.365.9000EmailEnlace
BD Diesel PerformanceBDDDO NOT RETURN WARRANTY ITEMS TO MEYER. CUSTOMER MUST GO TO cores.bddiesel.com TO COMPLETE ON LINE FORM. THERE WILL BE A UNIQURE CORE ID ON THE OUTSIDE OF THE BOX THAT WILL STORE AL THE DATA FROM THE ORIGINAL SALE. CUSTOMER WILL NEED TO PRINT OFF THEIR RETURN WAYBILLHector Mclean800.887.5030EmailEnlace
BedRugWISRMA REQUIRED CUSTOMER MUST CONTACT VENDOR DIRECTLY FOR WARRANTY ISSUES. VENDOR WILL NEED PICTURES OF THE DEFECT, PICTURES OF TEH BOX LABEL AND THE WHIT STICKER/LABLES ON THE UNDERSIDE OF THE OF THE PRODUCT. 800.462.8435EmailEnlace
BedslideBEDFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. SEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY AND TERMSLuis Munoz Luis@bedslide.com888.807.0099EmailEnlace
Belltech (KW Automotive)BELcustomer must contact vendor directly for any missing parts or warranty issues providing them with the original invoice. Returning within 30 days they will cover return shipping.Gabriela Morales8004453767EmailEnlace
Best PropackBPPContact vendor to facilitate warranty returns or Meyer SALES Rep for resolution in the field. 314.881.5810EmailEnlace
Bestop Inc.BESVendor may replace parts in the field * MEYER REP. must contact vendor for ANY CANVAS item WARRANTY claim. WARRANTY claims for POWER BOARDS will REQUIRE pictures of END CAPS and BRACKETS to be sent to Meyer Returns Support. * Bestop PowerBoards Warranty REQUIRES- YR/MAKE/Model & Controller Color * Vendor may coordinate WARRANTY pickups direct or send replacement parts. (RMA is not required for returns) Bestop has a new OE style replacement motor for their PowerBoards which will require the replacement of both motors, wiring harness and controller on the vehicle. Meyer Returns Support staff will need to obtain information from the customer to send Bestop the request for a replacement motor(s) & controller. Meyer Returns Support will need to get the Year, Make, Model of the vehicle & color of the controller and list it on the drop shipment warranty replacement PO as the controllers are vehicle specific. The PowerBoards must fall within the warranty of 3yr 36,000miles. Regarding product warranty periods, everything is 1 Year from date of purchase accept the following: 3 years or 36,000 miles= PowerBoards & Treksteps 2 years Supertops, Trektop, Sailcloth Replace-a-tops & Sunriders limited life time on Black twill topsCustomer Service800.845.3567EmailEnlace
Better BuiltBETTroubleshoot in the field. * Pictures are required for warranty and/or damage claims. Meyer Returns Support will request the following information for Warranty Claims: * There is a blue sticker inside the lid of the box with the information requested below 1.) Part # 2.) Proof of Purchase 3.) Date of Manufacture 4.) Work Order # (WO#) 5.) How the box is mounted (how many mounting points on each end) 6.) What exactly is wrong with the box * To expedite the claims process please provide pictures along with the information above. Powder coat limited 1yr warranty on defects Crown Series limited 1yr warranty on defects SEC Series limited 1yr warranty on defects SEC Series limited 1yr on powder coat defects HD Series limited 3yr warranty on defects HD Series limited 1yr on powder coat defects * DAMAGED product MUST be REFUSED or REPORTED to Meyer Returns Support within 48 hours or RETURN and CREDIT may be denied. * Meyer will not transport part(s) that have contained hazardous material. * 15% RESTOCK FEE ON SOME ITEMS ON THIS LINE 800.366.8269 Ext.2EmailEnlace
BF Goodrich / MichelinBFGMICHELIN®, BFGoodrich®, and Uniroyal® Passenger and LT tires are covered for workmanship and materials for six years from date of purchase. If proof of purchase is not available, the DOT date will be used to determine eligibility. MUST PROVIDE THE BELOW DOT# WHEEL TYPE AVG TREAD DEPTH TIRE MILEAGE VIN # Year/Make/Model 8008478475EmailEnlace
Big Ass FansBAFRMA Required, No Pick ups without vendor approval.NGpatrick.leveque@bigassfans.com EmailEnlace
Billet SpecialtiesBSP* Troubleshoot in field. * Field RMA is required and can be obtained via Meyer Returns Support. *CREDIT WILL NOT BE ISSUED UNTIL RECIEVED BY THE VENDOR * Proof of Purchase required * Damages must be reported within 24-48 Hours. * Concealed damaged must be reported to vendor. * Vendor may facilitate from field. * SEE VENDOR WEBSITE FOR PRODUCT INFORMATION AND WARRANTY POLICY 800.245.5382EmailEnlace
BilsteinBILNO RMA Required. Photos of the issue/part required. 800.537.1085EmailEnlace
Black Rhino WheelsBRWRMA REQUIRED WILL NEED PHOTOS OF THE DEFECTS.  EmailEnlace
Blue OxBLUDo Not Return to Meyer. Vendor will facilitate warranty issues in the field customer must contact directly for RMA BLU OX TEST CENTER 1 PUCCI PARK NEW BRITAIN CT 06051 402.385.3051EmailEnlace
BMF Wheels, Inc.BMFMEYER REP must contact vendor for Field RMA. Pictures are REQUIRED as well as proof of purchase.  EmailEnlace
Body Armor 4x4BODPHOTOS REQUIRED OF DEFECT * 15% RESTOCK FEE ON TOOLBOXES/BUMPERS/GR.GUARDS * CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues.Customer Service951.808.0750EmailEnlace
Bolt LockBOLCUSTOMER must contact vendor to TROUBLESHOOT any KEYING ISSUES. (See VEHICLE MATCH list from vendor website)Jason414.247.3552EmailEnlace
Borla ExhaustBRLDO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor directly for warranty/defect. DROP SHIP ORDER # is REQUIRED.Chris Baas805.986.8600 or 877.462.6752EmailEnlace
BOSS AudioBSSRMA REQUIRED ON ALL WARRANTY/DEFECTIVE ITEMSra.shipping@bossaudio.com EmailEnlace
BrandmotionBRMDO NOT RETURN TO MEYER: Customer must contact vendor for any install or Missing Parts issues. WARRANTY IS VOIDED if SERIAL # IS removed. Vendor will issue a Case# if resolution can not be determined. Once a case number has been obtained, Meyer must submit the case number to our returns team to receive return authorization for the defective product. Non-defective returns unopened and unused can simply be returned by requesting a return authorization number (RMA) from our returns team returns@brandmotion.com. 2 Year WarrantyTech Support734.619.1250 x1EmailEnlace
Bremen CompositesBREMEYER REP must contact vendor for Field RMA. Pictures are REQUIRED.Mike Jones800.664.4290EmailEnlace
Bulldog WinchBDGDO NOT RETURN WARRANTY "WINCH'S" TO MEYER. Customer MUST contact the vendor to coordinate any product returns.Brittany623.581.0121EmailEnlace
Bully Dog AccessoriesBUDFIELD RMA REQUIRED for WARRANTY - SERIAL # required for performance product returns. CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. VIN locked items will VOID credit.customer service940.783.9914EmailEnlace
BushwackerBUSCustomer must troubleshoot in the field. Vendor will address any missing parts or color match issues in the field. Field RMA not required.Customer Service800.234.8920EmailEnlace
Buyers ProductsBUYCUSTOMER must contact MEYER to TROUBLESHOOT any FIT or INSTALL issues. Vendor may coordinate WARRANTY pickups direct or send replacement parts, but all must go through MEYER * WARRANTY 1 YR. FROM DATE OF PURCHASE FROM MEYER ON MOST ITEMSCustomer Service440.974.8888 ext.102 or 110EmailEnlace
C&R RacingCRRTroubleshoot in field. RMA is not required. Parts must dry fit. Parts carry a 1yr warranty Damages must be reported with in 24-48hrts. Concealed damages must be reported to the vendor.Tech/Customer Support Phil Cook or Sam Goodman704.799.0955EmailEnlace
C.R. LaurenceCRLMEYER REP must contact vendor for Field RMA. Pictures are REQUIRED. 800.421.6144 ext.7780EmailEnlace
Callies Performance ProductsCPP* Troubleshoot in field. * Field RMA required. * Vendor will facilitate the return of the part from the field. * Serial # will need to be advised at the time of the RMA request. * Proof of Purchase required * Damages must be reported within 24-48 Hours. * Concealed damaged must be reported to vendor. * SEE VENDOR WEBSITE FOR PRODUCT INFORMATION AND WARRANTY POLICYTech/Returns419.435.7448 x115EmailEnlace
Cam LockerCLKTroubleshoot in field. 5 digit sales order on white label is required Field RMA is not required. Customer must provide proof of purchase. All parts must be dry fit. SEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR.Matthew Eastman800.277.0869 2205EmailEnlace
CamcoCMCTroubleshoot in field. Required Field RMA, must also send Meyer PO# when requesting RMA Warranty is limited to 1yr from purchase date. Vendor will facilitate the pick up or additional direction see vendor web sit for additional information on warranty policies.MaryC@camco.net800.334.2004 x208EmailEnlace
Carefree of ColoradoCCOWarranty Claim Form must be filled out by the dealer for any warranty issues. Field RMA will need to be requested by the Customer. When the warranty department receives the form, they will determine if warranty is valid and if it is, they will send another part or the part that needs to fix the issue directly to the customer. Vendor will advise how to facilitate the return once the RMA is advised. Vendor may send replacement parts direct to customer if warranted. products carry a 1yr with the exception of the premium vinyl canopy which carries a 10yr see vendor website for any warranty updates and policies.Customer Service303.469.3324EmailEnlace
Cargo BuckleIMMCUSTOMER may contact vendor to TROUBLESHOOT any FIT or INSTALL issuesSherry DeClue317.867.8138EmailEnlace
Cargo EaseCGEFIELD RMA REQUIRED with Pictures of part - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. SERIAL # REQUIRED. Vendor may repair or replace the product or part which is defectiveJordin Lyne905.768.2650EmailEnlace
CargoglideCGLTroubleshoot in field. Field RMA is Required for Warranty Claims and special drop ship orders and can be obtained by the customer. DO NOT RETURN TO MEYER. The vendor will facilitate the return of the warranty parts. 877.525.9535EmailEnlace
Carriage WorksCWGTroubleshoot in field. CWG parts carries 1yr warranty from the original purchase date on defects in material and/or workmanship, under normal use and when used for their intended purpose, to the original owner. Warranty does not include products, which have been subject to corrosion of the finish due to chemical, neglect and/or salt water exposure. Pictures will be required to determine if FD warranty can be approved.  EmailEnlace
Cars Inc.CRSas needed please contact vendor for any warranty/defective issues.  EmailEnlace
CenterforceCTF* Troubleshoot in field. 90day warranty on performance clutches * Field RMA required and maybe obtained by Meyer Returns Support. Pictures maybe required * Do not return special order or drop shipments to Meyer. They will need to be returned direct to the vendor. * All warranty returns are subject to vendor inspection. Vendor will facilitate the return and rework/replacement if warranted. * Missing parts must be reported to the vendor ** CONTACT VENDOR OR SEE VENDOR WEBSITE FOR PRODUCT INFORMATION AND WARRANTY POLICY ** Proof of Purchase required * DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. * CONCEALED DAMAGES MUST BE REPORTED TO VENDOR.Tech - Roger Warner Roman Bernal Bryan Wilson928.771.8422 x132 x135 x121EmailEnlace
Century Distributing, Inc.CAMCUSTOMER must contact vendor to TROUBLESHOOT any FIT, INSTALL, or WARRANTY claims. Vendor may coordinate WARRANTY pickups direct or send replacement parts.Autumn Williams574.206.0862EmailEnlace
CipaCIPTroubleshoot in field.Customer Service810.982.3555EmailEnlace
Coast To Coast InternationalCCCCONTACT MEYER REP/RETURNS SUPPORT FOR SPECIFIC WARRANTY/DEFECT ASSISTANCEMeyer Distributing Returns Department EmailEnlace
Cognito MotorsportsCOGRMA REQUIRED CUSTOMER MUST CONTACT VENDOR DIRECTLY TO TROUBLESHOOT ANY INSTALL OR WARRANTY ISSUES. VENDOR WILL DETERMINE IF THEY HAVE A WARRATY AND WILL ISSUE RMA TO THEM. DO NOT RETURN TO MEYER WITHOUT AN RMA  EmailEnlace
Combat Off RoadCBFTo initiate a warranty claim, email info@combat-offroad.com with details including contact information, purchase details and explanation of the problem. Please include pictures. 8885317183EmailEnlace
Comp CamsCOCTroubleshoot in field with CSR. If RMA is needed this can be given to Meyer Rep. to facilitate return.CSR - Vicki Sanders EmailEnlace
ConceptCCTMust have serial number for return  EmailEnlace
Corsa ExhaustCSRFIELD RMA REQUIRED - CUSTOMER must contact vendor for any MISSING PARTS, WARRANTY or DEFECT claim. RMA per location.Mike Meyer EmailEnlace
Covercraft Industries, LLCCOVPlease provide the serial # to verify purchase from Meyer 800.426.8377EmailEnlace
Creative ProductsCPGWarranty is 1 year from date of sale, RMA is not required 8884003044EmailEnlace
Cross TreadCRODO NOT RETURN TO MEYER FIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. 800.697.1746EmailEnlace
Crown AutomotiveCASRMA REQUIRED - DROP SHIPS CAN BE RETURNED TO MEYER AS THEY ARE SENT BACK ON A STOCK ADJUSTMENT Returns: Heavens@crownautomotive.net Defect/Technical assistance: adam@crownautomotive.netHeaven7813193151EmailEnlace
Cruzin CoolerCRZRMA required. Warranty period 120 days, proof of purchase required. Call mfg. 800.359.5199EmailEnlace
CSF CoolingCSFRMA REQUIRED - warranty form must be completed, detailed explanation of warranty issue is needed as well as photos of warranty issue and photos of serial numbersend to both alan@csfradiators.com; Christian@csfradiators.com9093551991EmailEnlace
CST SuspensionCSTVendor will provide RMA number for return or field destroy.Paul Dickerson EmailEnlace
Cummins/OnanCMGIF PART HAS BEEN USED CUSTOMER MUST CONTACT VENDOR DIRECT, THEY WILL BE DIRECTED TO TAKE PART TO THEIR LOCAL CUMMINS SALES AND SERVICE LOCATION FOR REPAIR. THEY DO NOT ISSUE RMA’S FOR UNITS ALREADY IN THE FIELD. Troubleshoot in field. Do not return Defective Generators to Meyer Distributing Customer is required to obtain Field RMA with manufacturer. Serial # and proof of purchase will need to be advised at time of the warranty request. Vendor will facilitate return and may advise if return/repair replacement parts will be sent or credit to be authorized. Cummins may advise the customer to go to the nearest Cummins Service location for repair or replacement services. Click the link below for the Cummins Service and Dealer locator. Select RV under the application and then select the appropriate city and state. http://power.cummins.com/sales-service-locator See vendor website for any update to the warranty guidelines http://power.cummins.com/Josh Kiemel502.491.4263 x8008EmailEnlace
Currie EnterprisesCUAThe vendor will provide RMA numbers for return. They want to handle everything in the field with the customer as much as possible. Most of their products are large crate axles. Very similar to current vendor DNA. Return product to 382 N Smith Ave, Corona, CA 92878Garrett Ankeny7145286957 X122EmailEnlace
Curt ManufacturingCURNo RMA required. Photos required of all warranty or defect.returnsdepartment@curtgroup.com800.798.0813 or 888. 265.5615EmailEnlace
DanaDNAFIELD RMA required. On all Axles vendor form musts be completed by Meyer along with photos of the issue. Once completed it must be sent to the vendor rep. Do not return Axle's to Meyer vendor will facilitate the return or warranty issues in the field. Do not return Axle's to Meyer vendor will facilitate the return or warranty issues in the field.  EmailEnlace
DartDATTroubleshoot in field. Field RMA required via Meyer Returns. DO NOT CREDIT TILL VENDOR CREDIT IS RECEIVEDPolomski, Craig 2483621188EmailEnlace
Daystar InternationalDAYCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Rust on Torsion Keys is not a warranty issue.Daystar Warranty Customer Suport800.595.7659EmailEnlace
DeatschWerksDWKTroubleshoot in field.Mike Deatsch405.217.0623EmailEnlace
Decked LLCDCKDO NOT RETURN TO MEYER- CUSTOMER MUST CONTACT VENDOR DIRECTLY FOR ANY WARRANTY/ DEFECTIVE ISSUES.  EmailEnlace
Dee ZeeDZEPICTURES & SERIAL # are required. Used tanks are not to be returned to Meyer. ** BLACK NERF carry a 3yr limited warranty and will require a proof of purchase at the time of the RMA requestKayla Caryl800.779.2102 x1417EmailEnlace
Delta / JOBOXDCIMEYER REP must contact vendor for FIELD RMA. CUSTOMER must COMPLETE the DCI Claim form and send to Meyer Returns Support with return request (see linked document). PICTURES and SERIAL # and production date are REQUIRED. * 15% RESTOCK FEE ON SOME ITEMS ON THIS LINESheryl Benedict800.643.0084 ext.2EmailEnlace
DemcoDMCDemco only accepts shipping damage returns if noted at the time of delivery with the delivery driver dropping off the shipment from Demco. Field RMA is required and can be obtained by the customer. Special order drop ship are non-returnable. Pics maybe required. Vendor will advise field destroy or will facilitate the return and/or rework/replacement if required. Do not return defective parts to Meyer. MSO = maybe required at time of RMA request and can be provided to show proof of ownership/license. Note Serial # on RGA at the time of the return request. The vendor will require the serial # and proof of purchase. See vendor website for updates on warranty guidelines and length of warranty. Missing parts can be sent from the vendor direct to the customer upon request.Verlin Keninger800.543.3626EmailEnlace
Demco TrailerDMDTroubleshoot in field. Field RMA is required and can be obtained by the customer. Special order drop ship are non-returnable. Do not return to defective parts to Meyer. Vendor will facilitate the return and rework/replacement if required. Note Serial # on RGA at the time of the return request. The vendor will require the serial # and proof of purchase. See vendor website for updates on warranty guidelines and length of warranty. Missing parts can be sent from the vendor direct to the customer upon request.Joshua Jaspers800.543.3626EmailEnlace
Demon Fuel SystemsDEMTroubleshoot in field. See vendor website for warranty policiesCustomer Service800.638.0032EmailEnlace
DeraleDERCUSTOMER MUST CONTACT TECHNICAL SUPPORT TO TROUBLESHOOT ANY INSTALL/ WARRANTY ISSUES. THEY WILL IS A SUGARCRM CASE NUMBER TO THE CUSTOMER. MEYER WILL THEN NEED TO CONTACT VENDOR WITH THAT CASE NUMBER TO GET AN RMA. VENDOR WILL ADVISE IF IT IS A FIELD DESTROY OR RETURN FOR CREDIT.RETURNS3232663850 EXT 235EmailEnlace
DeWalt ShelvingDWSFIELD RMA REQUIRED AS WELL AS PHOTOS  >EmailEnlace
DeWalt ToolsDEWVendor will handle in the field. We should not be bringing power tools back.Joey Gambler EmailEnlace
DFC EnginesDFCSerial number required, pictures of damage, verify if it is bolted to skid. Must complete warranty approval form. Must also supply invoice from original installation, Service history, receipts from certified facility and warranty registration form. 8778368341EmailEnlace
Diablo SportDBLSERIAL # required for performance product returns. CUSTOMER must contact vendor to TROUBLESHOOT any INSTALL issues. VIN locked items will VOID credit.Customer Service561.908.0040 option 1EmailEnlace
Diamond Eye PerformanceDEPTroubleshoot in field. Field RMA is required and can be obtained by the customer. Do Not Return to Meyer. Vendor may facilitate replacement parts and returns from the field. * Proof of Purchase required * Damages must be reported within 24-48 Hours. * Concealed damaged must be reported to vendor. * SEE VENDOR WEBSITE FOR PRODUCT INFORMATION AND WARRANTY POLICYJudy - Tech/Returns Support800.635.9950EmailEnlace
Diamond GroupDIGRMA is required for defective/warranty itemsHeather or Paula2059515100EmailEnlace
DicorDCRPhotos required. RMA Required on roofs If it is a damage in transit, we want a notation made on the BOL. Roofs need to be inspected prior to gluing them down. Roof warranty is a case by casembenedict@airxcel.com EmailEnlace
DinanDNNTroubleshoot in field. Meyer Rep must contact vendor to get Field RMA. Holley carries a 90day warranty (see vendor website for additional warranty policys. Vendor will advise freight account # to ship parts back to the vendor direct from the customer. BEP Holly Carbs & pumps 90 days with product replacement no credit. Troubleshoot in field and field RMA can be obtained by Meyer Rep with a call tag pick up from the customer. Contact is Customer Service 1-800-638-0032Customer Service800.638.0032EmailEnlace
Dinosaur ElectronicsDINRMA Required customer must contact vendor directly for any warranty issues. 5419944344EmailEnlace
Diode DynamicsDDYRMA REQUIRED - PLEASE COMPLETE VENDOR WARRANTY FORM FOR ANY WARRANTY/DEFECTIVE ISSUES. ANY OPENING,DISASSEMBLING, CUTTING WIRES WILL VOID THE WARRANTYJustin Steller3142053033EmailEnlace
Directed Electronics/ViperDEICUSTOMER must contact vendor to TROUBLESHOOT any INSTALL issues. SERIAL # or PRODUCTION Date Stamp (2 sets of numbers on bottom side of black unit)required for performance product returns. VIN locked items will VOID credit.Tom Nibert800.876.0800EmailEnlace
Dirty Life WheelsDLWRMA required for any warranty issueBlake EmailEnlace
Dometic USADOMRMA REQUIRED FOR ANY DEFECTIVE NOT WORKING PART, IF DAMAGED NO RMA REQURED AS LONG AS NOT INSTALLED, PHOTOS OF DAMAGED WILL BE REQUIRED. DOMETIC A/C's are a service warranty only and the vendor must be contacted directly by customer. Dometic will provide the nearest service center  EmailEnlace
Draw-TiteDRTNo RMA Required. Photos must be supplied for damages. ** NO RETURN FOR MISSING PARTS/HARDWARE ** Meyer Rep must contact vendor for any missing parts. Customer must supply the date code on the product when making your request to the Meyer Rep. Parts will be sent directly to the customer. When following up on missing parts please have the vendor supplied case #.Ben Sanchez877.855.7490 x7EmailEnlace
Driven Racing OilDROCUSTOMER must contact Meyer SALES Rep for resolution in the field. 866.611.1820EmailEnlace
Dually Design Company/DDC WheelsDDWRMA REQUIRED FOR ALL WARRANTY ISSUES MAY BE RETURNED TO MEYER.  EmailEnlace
Dura-Bond BearingsDRBCustomer must contact vendor to troubleshoot any issues. RMA requiredDSmith@Melling.com EmailEnlace
DuralinerDRLTroubleshoot in field. Customer will need to fill out the attached form and submit it to Meyer with their RMA request. Production Date Code of liner is REQUIRED (found on cab end of the driver-side). If it is appears to be a legitimate warranty the vendor will advise Meyer of the QCR #. Penda will issue a QRC # to Meyer. Vendor will need to advise if credit or free replacement will be sent. Vendor will need to advise if part(s) are to be returned or field destroyed. Customer must advise when requesting a warranty claim if the liner only or hardware kit with tailgate has quality issues. Warranty RMA's/QCR #’s will not always include the tailgate or hardware kit unless necessary.MAC PINTAR800.356.7704 x7762EmailEnlace
DV8 OffroadDVERMA Required, When sending warranty requests please include original PO, photos, address item will be returning from and disposition (credit or replacement. 3 year limited warranty for material or workmanship. based on following schedule 0-90 days will repair or replace the defective product. If it is repaired all parts, labor and return shipping is covered by DV8 Off Road 91 days to 1 year: defective product is eligible for repair only. 1year -3year: customer is responsible for labor cost. All parts and return shipping is covered by DV8 Off Road. This does not include consumables such as bulbs and glassMissy Verdoorn9516809595EmailEnlace
Dynomax Performance ExhaustDYNSEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD. 8003258886EmailEnlace
E&G ClassicsEGCTroubleshoot in the field with Tech Support . Field RMA required and can be obtained by the customer with E&G Returns Department. Customer will need to fill out the Warranty Card found inside each part or can also be found on vendor website. Do not return to Meyer without out prior approval. Vendor will facilitate the return in the field. Parts carry 3y/36k mile on structure. see vendor website for updates on warranty process and policies http://www.egclassic.com Good returned parts may carry a charge of $20.00 or up to 30% restock free. See vendor website for stipulation on restock fees.Rick Gaerttner8144547396EmailEnlace
Eagle Specialty ProductsESPTroubleshoot in field. Field RMA is required and maybe obtained by Meyer. Boxed wrong or missing parts maybe replaced in field and facilitated by the vendor. Proof of purchase is requiredRay662.796.7373EmailEnlace
Earl's PerformanceEARTroubleshoot in field. Meyer Rep must contact vendor to get Field RMA. Vendor will advise freight account # to ship parts back to the vendor direct from the customer. 800.638.0032EmailEnlace
EatonEATAny RMA/AFR process, the proper form (ATTACHED) must first be sent in accompanying your customer’s original POP.Barney Gwozdz EmailEnlace
Ecco Safety GroupECCCUSTOMER must contact vendor for any WARRANTY or DEFECT claim. FIELD RMA can ONLY be given to a Meyer Rep. Vendor may send direct replacement parts from the field.Michelle Goodloe800.635.5900 or 208.395.8018EmailEnlace
EchomasterECMMeyer can bring the part back after acquiring the serial number and will then get return authorization to send back to vendor. Must have serial number for return of audio (serial number placement, small clear sticker with black lettering)  EmailEnlace
EdelbrockEDLTroubleshoot in field with CSR. If RMA is needed this can be given to Meyer Rep. to facilitate return.CSR - Vicki Sanders800.416.8628 ext.2820EmailEnlace
Edge ProductsEDGFIELD RMA Required for WARRANTY - SERIAL number MUST be provided for ALL returns. If plastic is open on Tuners items are non-returnable. CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. VIN locked items will VOID credit.customer service888.360.3343 option 4EmailEnlace
EnercoENC* Troubleshoot in field. * Field RMA required. * Vendor will facilitate the return of product or will advised field destroy. * Proof of purchase is required (Meyer order #) * See vendor website for warranty requirements and guidelines.Amber800.251.000EmailEnlace
EurekaERKRMA required  EmailEnlace
EurosportEURMust have photos of defective issue RMA no longer required prior to returning.customer service386.672.7199EmailEnlace
EVO ManufacturingEVORMA required Proof of purchase is required for all warranty claims. Product Finish is not covered under warranty Springs are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle. Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warrantiesJake Schwarz EmailEnlace
ExtangEXTFIELD RMA REQUIRED - SERIAL number (Lot code ##) MUST be provided for ALL returns. CUSTOMER must contact vendor for any WARRANTY,DEFECT, MISBOX claim. Pictures may be requested.Customer Service800.326.1982EmailEnlace
Fab Fours Inc.FFBRMA REQUIRED - warranty covers products that are defective due to material and workmanship. RMA will not be issued to products that have been abused, neglect, corrosion or improper installation. Photo's are requiredLani Cauthen 8663851905EmailEnlace
FabtechFABRMA IS NO LONGER NEEDED ON DIRT LOGIC. RUSTING ITEMS ARE NOT COVERED. Troubleshoot in field. CUSTOMER must contact vendor for any FIT or INSTALL, or MISSING PARTS issues. DIRT LOGIC parts have a 60day replacement or 1 year warranty. Finish is NOT covered by warranty. Leveling kits, component, White body & Stealth carry a limited life time, but finish is not covered.Danny Grewell877.432.2832EmailEnlace
Fass Fuel SystemsFSSField RMA required on pumps and can be obtained by customer. DO NOT RETURN TO MEYER. Customer will need to provide serial # and registration information. Vendor will advise customer of RMA # and parts will need to be returned to vendor from the field at the customers expense. Once the part is repaired vendor will ship back to the customer at their expense.Caleb Henderson 800.769.3747 636.433.5410EmailEnlace
Fastway/Equal-i-zerFASCUSTOMER must contact vendor to TROUBLESHOOT any FIT, INSTALL, or WARRANTY claims. Customer must also contact the vendor for missing items. Vendor may also facilitate replacement or return in the field.Rob877.523.9103EmailEnlace
Federal MogulFDM* Troubleshoot in field. * Field RMA is required on special orders, drop shipments and must be returned direct to vendor from customer. * Field RMA maybe obtained by customer or Meyer Returns for warranty returns on stocking parts. * Vendor may facilitate the return back to the vendor direct or a field destroy. Advise vendor where to pick up the part(s). * Vendor will need proof of purchase (PO or order #) * Opened gasket kits are not returnable unless defective. see vendor website for warranty time frameCustomer Service248.354.7700 or 800.560.1400EmailEnlace
Fel-Pro OeFEPTroubleshoot in field. Field RMA is required on special orders, drop shipments and must be returned direct to vendor from customer. Field RMA maybe obtained by customer or Meyer Returns for warranty returns on stocking parts. Vendor may facilitate the return back to the vendor direct or a field destroy. Advise vendor where to pick up the part(s). Vendor will need proof of purchase (PO or order #) Opened Gasket kits are not returnable unless defective. see vendor website for warranty time frameCustomer Service800.560.1400EmailEnlace
Fel-Pro PerformanceFELTroubleshoot in field. Field RMA is required on special orders/drop shipments and must be returned direct to vendor from customer. Field RMA maybe obtained by customer or Meyer Returns for warranty returns on stocking parts. Vendor may facilitate the return back to the vendor direct or a field destroy. Advise vendor where to pick up the part(s). Vendor will need proof of purchase (PO or order #) Opened gasket kits are not returnable unless defective. see vendor website for warranty time frameCustomer Service800.560.1400EmailEnlace
Fia Inc.FIACUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. FIELD RMA required on SPECIAL ORDERS (excludes leatherlite series)Harold Applebaum800.835.0438EmailEnlace
Fill-RiteFIL* DO NOT RETURN USED/INSTALLED FIL PARTS TO MEYER, These parts are NOT to be TRANSPORTED * CUSTOMER MUST Troubleshoot with Chris Hogstrom chris@rhinconline.com any INSTALL & Warranty Issues with FIL product. Chris will advise Meyer on parts needed to resolve issues and will facilitate with Meyer or vendor the shipping of repair parts. If NON-Repairable & WARRANTY is advised Chris will advise Meyer to Warranty in the field. * PICTURE OF THE MFG. DATE CODE LABEL IS REQUIRED FOR ALL WARRANTY CLAIMS and Tech. name for verification * RED Pump 2yr. Warranty * YELLOW Pump 1yr. Warranty * Meyer will not transport part(s) that have contained hazardous material.Technical Support800.456.7865; 800.634.2695EmailEnlace
FirestoneFIR6/8/22 RMA not required. If Meyer carries the replacement pieces customer can reorder and we will do the return for just that piece of the kit. If we do not carry the replacement piece we can reach out to the vendor for it or the ENTIRE kit may be replaced and defective returned. CUSTOMER must contact vendor (Tech Support) for any INSTALLATION issues.Ride Rite Tech line; Shelly Daddone800.888.0650 Customer ServiceEmailEnlace
Firman GeneratorsFMNcustomer needs to contact vendor directly for any warranty issues, vendor will issue RMA if needed. They can also call the Service Department 844-347-6261Heidi6023622210EmailEnlace
Flame KingFLKNon Returnable per NG.  EmailEnlace
Flaming RiverFLA* Troubleshoot in field. * Field RMA required and maybe obtained by Customer or Meyer Returns Support. Pictures maybe required * Do not return special order or drop shipments to Meyer. They will need to be returned direct to the vendor. * All warranty returns are subject to vendor inspection. Vendor will facilitate the return and rework/replacement if warranted. **CREDIT WILL NOT BE ISSUED UNTIL RECIEVED BY THE VENDOR * Missing parts must be reported to the vendor ** CONTACT VENDOR OR SEE VENDOR WEBSITE FOR PRODUCT INFORMATION AND WARRANTY POLICY ** Proof of Purchase required * DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. * CONCEALED DAMAGES MUST BE REPORTED TO VENDOR.Kevin Calogar800.648.8022 x132EmailEnlace
Fleece PerformanceFPEDO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer must contact the vendor with install and warranty issues. All Cores must be returned in 30days of receipt and have the core return form properly completed. Customer is responsible for all shipping charges unless otherwise indicated.customer service317.286.3573 x2017EmailEnlace
FlowmasterFLOTroubleshoot in field. Field RMA required and can be obtained by Meyer Returns Support. Carries a 90 warranty Pictures maybe required. See attached warranty guidelines or vendor website for any updates on warranty guidelines and procedure.customer service707.544.4761EmailEnlace
FlowtechFLTTroubleshoot in field. Field RMA required and must be obtained by Meyer Returns Support. Vendor will advise freight account # to ship parts back to the vendor direct from the customer.Customer Service800.638.0032EmailEnlace
FluidamprFLUFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. Warranty claims must be shipped pre paid to the vendor by customer.Customer Service716.592.1000EmailEnlace
Fox ShocksFOXFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. Please go to this link below to start your claim https://www.ridefox.com/service.php?m=truck Vendor may request CUSTOMER to send parts direct for rework/replacement * 1yr. warranty on mfg. defects (to be determined by vendor) •Part Number & Quantity: 985-24-192 Qty.? •Photo of shocks showing the Fox PN and Job number engraved on the bearing cap. •Photo of label on box showing job#: •Reason for return: “this part was leaking out of the box.” •PO you provided Fox wherein product was purchased with, or Proof of Purchase copy. •Location/Address of the product being returned:cx-team@ridefox.com619.768.1800EmailEnlace
Frontier Truck GearFROPictures are REQUIRED for any warranty issues. * 15% RESTOCK FEE ON SOME ITEMS OF THIS LINE *Murray800.634.3086EmailEnlace
Fuel WheelsFWHDO NOT RETURN TO MEYER - PLEASE CONTACT THE VENDOR DIRCTkennethw@wheelpros.com847.806.0719EmailEnlace
Furrion OutdoorFRNRMA REQUIRED WILL NEED PHOTOS AND SERIAL NUMBER  EmailEnlace
Fury Off-RoadFURCustomer must contact vendor directly for any warranty issues. vendor RMA required - must complete vendor form. All warranty tires needs to have picture showing the defective part. It is Out of Round/Wobbling •please provide any picture or video (recommended) to show that the tire is wobbling Picture showing the size of the defective from the sidewall with the DOT # and 4 digits next to it •Picture or video showing the defective area •Picture showing the white color bar code sticker on the sidewall  EmailEnlace
G2 Axle and GearGGACustomer must contact vendor directly for any warranty issue vendor will want to handle in field. Photo's of issue needed. RMA to be issued to customer.  EmailEnlace
GarrettGARcustomer must fill out attached RMA document. Once RMA is received item will be returned to vendor for inspection. Vendor will send Meyer a failure analysis form with pictures to be reviewed by Meyer and the customer.Brett Dilling or Leslie Lee EmailEnlace
Garvin Wilderness ProductsGRVRMA REQUIRED - Pictures will be needed of any warranty issue, vendor will send out missing parts. Product carries a Limited Lifetime Warranty.Ron Garvin6194407415EmailEnlace
Gator FastenersGTRVendor RMA required. Return directly to vendor. Broken -Original PO and a photo damage, normally field destroy with proof of picture.Chris Searle3212848660EmailEnlace
Gen-Y HitchGNYWe are no longer using this email address. To best process your warranty claim- we need all the information requested, to the best of your knowledge, at this link : https://genyhitch.com/return-claim/  EmailEnlace
Generac Power SystemsGPSDO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns.Customer Service888.436.3722EmailEnlace
GHP GroupDGLall heaters have a one year warranty please contact vendor for any warranty issues. RMA needed 8774474768EmailEnlace
GirardGIRALL WARRANTY MUST BE HANDLED BETWEEN CUSTOMER AND GIRARD. THEY MUST CONTACT THE TECHNICAL SUPPORT. TECHNICAL SUPPORT CAN BE REACHED BY GOING TO WWW.GREENRVPRODUCTS.COM AND GO TO "CONTACT US" 8665591221EmailEnlace
Go IndustriesGOICUSTOMER must contact vendor for any FIT, INSTALL, or WARRANTY Claim. Serial # and PICTURES may be REQUIRED. Vendor may coordinate MISSING or REPLACEMENT parts to be sent to the customer. WARRANTY EXCLUDES RUSTING on exposed welds. All returned parts MUST BE packaged & complete. * 15% RESTOCK FEE ON SOME ITEMS ON THIS LINE *yan@goindustries.com800.527.4345 Ext. 124EmailEnlace
Go Power!GPOAny tech issues or warranty claim the customer must contact the vendors tech support dept. to trouble shoot the issues. If there has been a product failure the customer must provide their proof of purchase and the vendor will ship out a replacement 8662476527 ext 2EmailEnlace
Go RhinoRHICUSTOMER must contact the vendor for CONCEALED DAMAGES or MISSING PARTS claims. MEYER REP must contact vendor for FIELD RMA. Pictures are REQUIRED. * 15% RESTOCK FEE ON SOME ITEMS ON THIS LINE *Myriam Sanchez or Benjamin Ramirez888.427.4466EmailEnlace
GolightGLTSEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD. SUPPLY PROOF OF PURCHASE.Jason Repas3082783131EmailEnlace
Goodmark/ProEFXEFX9/28/23 BT - Line set as DISCONTINUED. Non-Returnable to Meyer - GET WITH SALES ACCOUNT OWNER AND BE VERY SELECTIVE BEFORE ISSUING ANY CREDITS FOR DAMAGES/DEFECTS. TROUBLESHOOT IN FIELD. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD. PO INFORMATION IS ALSO REQUIREDTony Pascale7702075063EmailEnlace
Gorilla PerformanceGOPRMA REQUIRED PRIOR TO COMING BACK TO MEYER CUSTOMER MUST CONTACT VENDOR DIRECTLY TO WORK OUT ANY WARRANTY/DEFECTIVE ISSUES. IF THE CELLOPHANE IS REMOVED IT CAN NOT BE RETURNEDLandon Hymas EmailEnlace
Gorilla WhipsGRWDo not return to Meyer. Field RMA required and obtained by the customer. Vendor will facilitate replacements in the field. Proof of purchase required at time of warranty request.Customer Service801.899.3513EmailEnlace
Great Plains IndustriesGPICUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues Serial number and date code are needed on any defective item. ANY PART that has come in contact with FUEL/CHEMICALS CAN NOT be transported by Meyer Logistics. These MUST BE handled in the field with vendor. 800.835.0113EmailEnlace
Green Country DecorGCDNO RETURNS.  EmailEnlace
Green Mountain GrillsGMG04/17/23 CLAIMS MUST BE MADE AT DELVIERY PER STEVE- THE REP FOR THIS LINE Field RMA required. Vendor must be contacted for any warranty or finish defects. 530.347.9167EmailEnlace
GroundforceGRFDO NOT RETURN TO MEYER Customer must contact vendor for RMA item must be shipped directly back to vendor from customerJody7244302068EmailEnlace
GROZ USAGOZAll returns must include a return authorization (RA) number that can be obtained by contacting Groz USA Customer Service Department at1-888-685-2916. Include copy of original order and return in original packaging. If within 30 days from date of purchase your customer is not satisfied with any item for any reason simply contact us for return your purchase for exchange, credit or refund. To file a claim simply contact us at (800) 340–3413 or email info@groz-usa.com and we will provide you with the address for where to ship the product back prepaid. You must provide proof of purchase and an explanation of how the breakage occurred. In the event it is determined that the product has been tampered with, or altered in any way, this guarantee is void and all claims against the product will not be honored.info@groz-usa.com8003403413EmailEnlace
GSI OutdoorsGSISubmit a Request Form with order number, reason why, and items you would like to return. GSI will send an RMA form to include in pkg. Place item(s) to be returned and the RMA form into the package and securely seal the package. Ship package to GSI Outdoors ATTN: Returns 1023 S Pines Rd, Spokane WA 99206. Please note that GSI Outdoors does not currently offer prepaid return shipping labels. Be sure to make note of the tracking information. GSI Outdoors cannot accept responsibility until the package arrives at our facility.Greg Larson EmailEnlace
Handy IndustriesWTNFIELD RMA is required and must be obtained by customer. Pics maybe required. CUSTOMER must contact vendor to troubleshoot any WARRANTY or DEFECT claims and provide proof of purchase. Handy Claim form MUST be completed and sent to Meyer Returns Support with return request (see linked document). Customer will need to address missing parts with vendor from the field. See vendor website for additional warranty guidelines/policies.TROY HARTZ641.752.5446EmailEnlace
Hayes Brake Controller CoHYSField RMA required. Vendor will facilitate return to vendor or field destroy. 1.800.892.2676EmailEnlace
Hella, Inc.HELCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. * Accessories, Optilux HID and Halogen Advantages (1yr limited warranty) * LED Advantages (5yr limited warranty) * Zenon Strobe Advantages (2yr limited warranty)Casey Callaway770.631.7556EmailEnlace
Hellwig ProductsHWGContact vendor to TROUBLESHOOT any FIT or INSTALL issues. Missing Parts claims must be directed to the vendor and not done online. RMA and exchanges will need to be handled through the vendor portal https://hellwigproducts.returnsportal.netMichelle800.367.5480EmailEnlace
Hi-Lift JackHILTroubleshoot in field. Field RMA is not required. Missing parts need to be addressed in field per Katrina. Proof of purchase provided to Meyer. Product can be returned via Meyer. SEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD.Katrina812.384.4441EmailEnlace
Hidden HitchHID** NO RETURN FOR MISSING PARTS/HARDWARE ** Meyer Sales Rep must contact vendor for any missing parts. Customer must supply the date code on the product when making your request to the Meyer Sales Rep. Parts will be sent directly to the customer. When following up on missing parts please have the vendor supplied case #.  EmailEnlace
HighlandHIGDo not Return to Meyer.  EmailEnlace
HolleyHOLTroubleshoot in field. Meyer Rep must contact vendor to get Field RMA. Holley carries a 90day warranty (see vendor website for additional warranty policys. Vendor will advise freight account # to ship parts back to the vendor direct from the customer. BEP Holly Carbs & pumps 90 days with product replacement no credit. Troubleshoot in field and field RMA can be obtained by Meyer Rep with a call tag pick up from the customer. Contact is Customer Service 1-800-638-0032 Classic Instruments Returns Ship To Location: Classic Instruments 826 Moll Drive Boyne City, MI 49712Customer Service800.638.0032 option 3EmailEnlace
Holman/KargomasterKGMDO NOT RETURN WARRANTY or MISSING PARTS PRODUCT TO MEYER. CUSTOMER must contact VENDOR for ANY CLAIMS in the field. Missing parts/shortages may be sent direct to the customer. Vendor will need the run date and the package weight 916.638.8703 or 317.710.1805EmailEnlace
HookerHOKTroubleshoot in field. See vendor website for warranty policiesCustomer Service800.638.0032EmailEnlace
Hoosier TireHOOField RMA required and can be obtained by Vendor may facilitate the return from the field. Vendor will not allow special ordered parts to be returned.Dustin574.936.8344EmailEnlace
Hopkins ManufacturingHOPMeyer must contact vendor directly if they would like a replacement for a defective/ warranty item if not they can be returned to Meyer without an RMA 9185407902EmailEnlace
HornblastersHRBTroubleshoot in field. RMA required and can be obtained by the customer. Vendor will advise if parts will be sent to repair parts in the field. Vendor will facilitate the return of the parts back to the vendor for repair/return back to the customer. Proof of purchase will need to be provided with the Meyer order # as the reference. See vendor website for product information and additional warranty requirements.Returns877.209.8179EmailEnlace
Hotchkis Sport SuspensionHSSMEYER REP must contact vendor for Field RMA. ** CUSTOMER MUST REGISTER ALL PARTS FOR WARRANTY COVERAGE ** CUSTOMER may contact vendor to troubleshoot FIT or INSTALL issues. Manufactured parts carry 3yr warranty & wearable parts carry 90day warranty (SEE VENDOR WEBSITE FOR PARTS & WARRANTY INFO)Jon Rasmussen & Drew Oliver562.907.7757EmailEnlace
HuffyHFBKeep in field, repair there. NG. To order parts: huffybikes.com/parts or 1-800-872-2453.huffybikes.com/parts EmailEnlace
HurstHURTroubleshoot in field. Field RMA required and can be obtained by Meyer Returns Support. Carries a 90 warranty Pictures maybe required. Warranty is limited to repair or replacement by Hurst performance of any Hurst Performance Product that fails because of defect in materials or workmanship. See attached warranty guidelines or vendor website for any updates on warranty guidelines and procedure.Customer Service/Tech Support707.544.4761EmailEnlace
HushmatHMTFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim.Tonya Vernon(MFG) or Thom Bernheisel(REP)913.599.2600 or 574.971.6248EmailEnlace
Husky LinerHSL6/6/22-RMA not required. Photos of damages/warranty not require. May be returned to Meyer. Limited life time warranty. RETURN VIA MEYER UNLESS DROP SHIPPED.customer service Candi.Musgrove@truck-hero.com  Robyn Groover >EmailEnlace
HWH CorporationHWHConsumer to contact HWH  EmailEnlace
HypertechHYP** SERIAL # REQUIRED FOR ALL RETURNS(GOOD or WARRANTY)** CUSTOMER must contact vendor to TROUBLESHOOT any INSTALL issues. VIN locked items will VOID credit.CaSandra Cannon800.532.3351EmailEnlace
ICI/Innovative Creations, Inc.ICIBumpers require a Field RMA. CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. * SS warranty Limited * Black Powdercoat 3yr. warranty.Returns - Rafael Riveros800.626.8746EmailEnlace
Icon Vehicle DynamicsICO* Troubleshoot in field. * Field Service # aka RMA will need to be obtained by Meyer staff. * Go to http://www.iconvehicledynamics.com/tech-support/shock-service/ to obtain the field RMA.Customer Service/Returns951.689.4266EmailEnlace
Impact Race ProductsIMPRMA required on all defective/warranty items. Vendor will also need the Meyer PO when requesting RMA.Eric EmailEnlace
In Pro Car WearCAWCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues.Suzette800.934.4599EmailEnlace
Insane Jeep AudioIJAcustomer must contact vendor for technical support on any issues by going to www.insaneaudio.com and click on support to open a ticket. A valid proof of purchase, with the purchase date clearly indicated, must be provided.  EmailEnlace
Interco Tire CorporationITCMEYER REP must contact vendor for Field RMA. DOT ## and Pictures are REQUIRED (see attached form - form must accompany the part when returned to Meyer/Vendor). * 5yr. warranty for mfg. defects for life of the tire NOT from purchase date (CUSTOMER original purchase receipt will be required as proof)Michelle Lavergne800.299.8000 ext 219EmailEnlace
Iron CrossIROVENDOR IS DISCONTINUED.Austin or Lori918.227.7433EmailEnlace
J T & T ProductsJTTRMA is Required 90 day warranty appliesFabiola Hernandez800.633.3655EmailEnlace
Jae EnterprisesJAEFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. PICTURES may be requested. Vendor may coordinate WARRANTY pickups direct or send replacement parts to resolve.Customer Service800.626.3367EmailEnlace
Jamo ExhaustJAMEXHAUST SYSTEM MAY NOT BE RETURNED.  EmailEnlace
JCR Offroad, IncJCRContact vendor for any install or warranty issues. RMA required  EmailEnlace
Jet Performance ProductsJET* CUSTOMER must contact vendor to TROUBLESHOOT any INSTALL issues. * Field RMA required via Meyer Returns. * SERIAL # required for preformance product returns. * VIN locked items will VOID credit.Customer Service800.535.1161EmailEnlace
JKS ManufacturingJKSCUSTOMER MUST CONTACT VENDOR DIRECTLY FOR ANY DEFECTIVE/WARRANTY/MISSING PARTS ISSUE. Photos are required of incorrect part, part label on box and picture of complete box. Customer contact vendor by email at JKSTech@ridefox.comjkstech@ridefox.com517.278.1226 or 517.278.7144EmailEnlace
JR ProductsJRPTroubleshoot in field. Field RMA is required and can be obtained by the customer. The vendor will facilitate the return and replacement if needed. Missing parts will need to be handled from the field with the vendor.Nick Goodrich800.269.7622 X409 & X413EmailEnlace
JVCJVCContact vendor directly for any warranty issues they will arrange pick up from the customer and after received back they will either send replacement or issue credit if under warranty. Serial number must be provided for audio.  EmailEnlace
JW SpeakerJWSAll Defective / Warranty issues will need to be logged on the Vendor Portal. Please go to vendor website for warranty coverage http://www.jwspeaker.com 800.558.7288EmailEnlace
K&N FiltersKNNField RMA is required. CUSTOMER must contact vendor directly to handle any defective/warranty claims. Once RMA is received item mustCustomer Service/Tech Support800.858.3333EmailEnlace
K-Source Inc.KSIMEYER REP to obtain RMA - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. * DO NOT RETURN VS-8 Vision System via Meyer * if returning a camera, they have to have the registration card sent to them before they’ll return. 310.608.2538EmailEnlace
KC HilitesKCL* Troubleshoot in field within 5 days of receipt. * Field RMA is required customer must contact vendor directly to handle all warranty issues * Do not return special order or drop shipments to Meyer. They will need to be returned direct to the vendor. * All warranty returns are subject to vendor inspection. * Missing parts must be reported to the vendor ** CONTACT VENDOR OR SEE VENDOR WEBSITE FOR PRODUCT INFORMATION, WARRANTY POLICY AND TERMS ** Proof of Purchase required * DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. * CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. 800.528.0950EmailEnlace
KeeperKEE* Troubleshoot in field. * Do not return special order or drop shipments to Meyer. They will need to be returned direct to the vendor. * All warranty returns are subject to vendor inspection. Vendor will facilitate the return and rework/replacement if warranted. * Missing parts must be reported to the vendor ** CONTACT VENDOR OR SEE VENDOR WEBSITE FOR PRODUCT INFORMATION, WARRANTY POLICY AND TERMS ** Proof of Purchase required * DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. * CONCEALED DAMAGES MUST BE REPORTED TO VENDOR.Valerie Yanity414.908.0883EmailEnlace
Kentrol/Fishbone OffroadKEN90 WARRANTY, VENDOR TYPICALLY SENDS OUT REPLACEMENTS Fishbone offers the original purchaser a 90 day warranty from defects in material and workmanship on all powder coat finishes from the original date of purchase. Due to the intended use of our product, our warranty does not cover product damaged sustained from offroad use or accidents. This warranty does not cover shipping damage, misuse, mishandling, road hazards, or product modifications. This warranty does not cover cost for installation, removal, labor or shipping. This warranty only applies to new products installed on the original vehicle. The warranty covers the replacement or repair of any part or parts that are defective and returned to Fishbone Offroad accompanied with a bill of sale and RGA number. Warranty claims cannot be determined until goods are inspected. If you live in an area that uses salt or other harsh chemicals for snow and ice removal, it is very important that you keep your products clean. If you allow salt and other harsh snow and ice removing chemicals to stick to your product, this may cause your product to rust prematurely and will void your warranty (warranty will be voided under product neglect) Please also DO NOT use any chemicals, even those meant to protect the product, on the product without consulting Fishbone Offroad. Failure to do so will void your warranty (warranty will be voided under product modifications). Product hardware and accessories (latches, lights, bolts, etc...) are not covered under any part of our warranty. Tire carrier spindles on bumpers are not covered by the warranty. Upon our receipt of the damaged product it will be replaced or repaired at our discretion. The warranty is only applicable for the original purchaser of the product; all names of customers are held in a Fishbone Offroad database for reference. All returns will be checked and any modifications made to any of these products will void the warranty. Installation labor, paint, powdercoat, or any other finishes are not covered by warranty. We do not cover shipping, insurance or any import fees, duties and taxes for the returned product. If after inspection, we found the product to be defective in materials or workmanship, we will at no cost repair or replace the defective product with the same or comparable product on a “best-effort” basis. This warranty does not cover incidental or consequential damages such as damage to or loss of directly or indirectly caused by the product. Please contact us about product failures regardless of reason.  EmailEnlace
KenwoodKNWContact vendor directly for any warranty issues they will arrange pick up from the customer and after received back they will either send replacement or issue credit if under warranty. Serial number must be provided for audio.Chase Connor8472472011EmailEnlace
Key Parts, Inc.KPIRMA Required please contact vendor directly with any warranty/defective issues.Jonathan Burnham8009921064EmailEnlace
KingKIGTroubleshoot in field. Field RMA required and can be obtained by the customer or Meyer Returns Support. Vendor will facilitate the return of any defects Proof of purchase is required. All returns will need to verify serial # was purchased by Meyer with King Connect. 952.922.6889 x 147EmailEnlace
Klein ToolsKNTIF END USER IS RETURNING PRODUCT PLEASE FILL OUT WARRANTY INFORMATION ON KLEIN WEBSITE. PROOF OF PURCHASE IS REQUIRED. (Website, Click on Support, Then Warranty)Maureen Downey EmailEnlace
Kleinn Air HornsKLNFIELD RMA IS REQUIRED (END CUSTOMER) DO NOT RETURN WARRANTY PRODUCT TO MEYER. End customer MUST contact the vendor to coordinate any warranty related issues, contact Meyer only for current, new, unopened product returns.Customer Service520.579.1531>EmailEnlace
KlymitRLG* Troubleshoot in field. * Field RMA is required and must be obtained by the customer. Vendor may facilitate from the field. * Special order and drop shipments will need to return direct to vendor with Field RMA. * Missing parts will need to be address with vendor in the field. Damages must be reported with in 24-48hrs. Concealed damages must be reported to the vendor. See vendor website for additional warranty guidelinesCustomer Service888.685.GEAR or 828.665.1007EmailEnlace
KMC-XD WheelsXDWField RMA required  EmailEnlace
KnaackKNASerial #, if applicable, and Pictures are REQUIRED. Proof of purchase provided to Meyer. Product can be returned via Meyer 800.456.7865EmailEnlace
Kool-VueKVUReplacement only (on credits ) will be issued for the following: Lost items by carrier, incorrect items shipped to customers by warehouse.DGKVcustomerservice@usautoparts.com EmailEnlace
Kronen PropackKPPContact vendor to facilitate warranty returns or Meyer SALES Rep for resolution in the field.Jennifer Corley314.881.5810EmailEnlace
Lasalle BristolLSB* Troubleshoot in field. * Field RMA required and to obtained by customer. * All LaSalle Bristol products carry a 1yr warranty. ** Extended warranty on RMA XTRM (12yrs) & Utopia Faucets (5yrs) will required the attached Warranty card to be completed and sent to LaSalle * Vendor will advise if parts are to be returned via call tag or FD. * LaSalle Bristol contact Teresa Adams @ ext. 336 * RMA XTRM or Utopia contact Judy Smith ext. 330 * The caulking products have a shelf life of 18months and have a date noted on the part. We will not be able to bring these parts back if they are out dated. * See attached and/or vendor website for warranty process and additional information.Cheryl Garrett574.295.4400 ext. 336 or 330EmailEnlace
Leed BrakesLEEIf the customer has an issue with one of our products, whether “not working”, damaged, defective, installation issue,have the customer call them directly 716-852-2139 X-1004 or X-1006. Customer can also email part nbr, order nbr to tech team johnm@leedbrakes.com or tech2@leedbrakes.comJohn M716.852.2139EmailEnlace
LeerLERCUSTOMER MUST CONTACT VENDOR DIRECTLY RMA REQUIRED ON ALL WARRANTY/ DEFECTIVE ITEMS.  EmailEnlace
LifetimeLFTCustomer must contact vendor directly for any manufacturing defects field RMA requiredReturns8002253865EmailEnlace
LionsheadLNHTroubleshoot in field. Field RMA required. Vendor will send out replacements instead of sending credit in most cases and this will need to be verified when return is requested. see vendor website for warranty requirements and warranty form http://www.lionshead.digitalhill.com/media/uploads/0/952_2015-Warranty-Claim-Form-Update-pdf.pdfMARK WILLIAMS574.533.6169EmailEnlace
LippertLIPMeyer must contact vendor directly for any defective issues or missing parts. Missing Parts please submit photo's of what the customer received along with the original PO#  EmailEnlace
Loading ZoneLODFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. 866.247.0300EmailEnlace
Lod - Jeep/TruckLDBTroubleshoot in field. Field RMA is required. Vendor will facilitate the return in the field. Missing parts will need to be addressed in the field.Chris765.385.0631EmailEnlace
Louisiana GrillsLSGcustomer must contact vendor for warranty issues, unit must be registered for any warranty issues call customer care to verify if it is registered.RA@Dansons.com4809239630EmailEnlace
LRG RimsLRGDiscontinued Line. Absolutely no returns.  EmailEnlace
Lucas Oil ProductsLUCDO NOT RETURN WARRANTY PRODUCT TO MEYER. CUSTOMER must contact Meyer SALES Rep for resolution in the field.  EmailEnlace
Luma LEDsLMADO NOT RETURN TO MEYER Customer must contact vendor directly to resolve any warranty/defective issues.  EmailEnlace
Lund InternationalLNDMEYER REP must contact vendor for Field RMA for TOOLBOXES & TANKS. CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Lund carries a limited life time and once a part is discontinued it is no longer able to warranty 800.241.7219 Ext 18409EmailEnlace
Luverne Truck EquipmentLUVMEYER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. SERIAL # is REQUIRED & must be added to Meyer RGA. * CREDIT MAYBE SUBJECT TO VENDOR INSPECTION on a case by case basis (rework or repair parts maybe required by Luverne). Pictures are required of the area of defect including packaging. Proof of purchase must be provided to Meyer & Luverne to validate warranty time line. Product can be returned via Meyer.returnsdepartment@curtgroup.com8772878634EmailEnlace
Mag-HytecMHT* Troubleshoot in field. * Field RMA required and must be obtained by customer. * Do Not Return to Meyer 818.786.8325EmailEnlace
MagnaFlow Exhaust SystemsMAGTroubleshoot in field. WARRANTY for Catalytic Converters **FORM FROM BELOW MUST BE SUBMITTED ** www.magnaflow.com/02catalytic_converters/04basics/04warrantyreg.asp for the required warranty registration card. Return Address: Attn: Returns Dept. 3937 Ocean Ranch Blvd., Oceanside, CA 92056 We will NOT be accepting returns delivered by RoadRunner Dawes -Dock hours are Mon-Friday 6am-1:30pm -Packing slip must be on pallet or boxes -An assigned RGA number must appear on all returned product, packing slip, freight bill, and any correspondence. ANY returns without an assigned RGA number will be refused. -Must be PrePaid -The returns department will not take deliveries from the USPS (US Postal Service-Regular Mail)Tech9498585900EmailEnlace
MagnafuelMGFTroubleshoot in field. DO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns. Return request on warranty parts are required to be addressed with the customer and the vendor. The vendor will advise the customer on the return/repair or credit process.Robbie or Tech Support719.532.1897EmailEnlace
Mahle MotorsportsMAHRMA REQUIRED - contact vendor for any warranty/defective item issues.  EmailEnlace
ManleyMPPTroubleshoot in field. Field RMA can be obtained but not required. RMA to be obtained by Meyer. Vendor may facilitate the return direct from the field. Proof of purchase in the form PO # or Invoice.Johnny800.526.1362EmailEnlace
Massive AudioMAUSerial nbr must be provided for audio.Henry Gallardo EmailEnlace
MasterackMRKPhoto's of damages to parts and boxes will be required as well the white label on boxes.  EmailEnlace
Max-Bilt LLCMXBCustomers reach out to vendor directly for warranties.Mark Ostman EmailEnlace
MAXTRAXMXRRMA required will need to supply a PO # , must contact vendor directly for any install issues, missing items.CUSTOMER SERVICE303.706.9700EmailEnlace
MaxxisMXS* Field RMA required and must be obtained by Meyer Returns Support. The attached form will need to be completed and forwarded to vendor at the time of warranty request. * Vendor will facilitate pick up of warranty parts. Do not return warranty parts to Meyer. • Note the serial/DOT # and on the Meyer RGA for all returns good & bad. • Note the serial/DOT # and vendor RMA on the Meyer RGA when creating the RGA. ** See vendor website for warranty policy and guidelines. ** Credit will be subject to vendor credit and maybe prorated depending on tread depth **Tech/Customer Service866.509.7067 or 678.376.4420EmailEnlace
Maxzone Vehicle Lighting CorpMZNALL DEFECTIVE ITEMS MUST BE RETURNED TO MEYER  EmailEnlace
MBRP, Inc.MBRCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Field RMA will be required on any fit or install issues per MBRP. MISSING Parts claims MUST be directed to the vendor.Customer Service888.636.7223EmailEnlace
MellingMELCustomer must contact vendor to troubleshoot any issues. RMA requiredDOUG SMITH6014794660EmailEnlace
Metra Electronics/HeiseMETNo RMA Required Troubleshoot in field any install issues or missing parts. Vendor will need the following information Part#, Qua's and a brief description of the issue. Warranty items can be retuned to Meyer.Sean Rombach8002210932EmailEnlace
Meyer Products LlcMPRRMA REQUIRED, REF. VENDOR WEBSITE FOR ADDITIONAL INFORMATION THAT CUSTOMER WILL NEED TO SUPPLY. Cu FIELD RMA may ONLY be issued to a Meyer Rep if approved for return. ***RETURN ADDRESS*** 18513 EUCLID AVE CLEVELAND, OH 44112 Contact the below email for any missing pieces becky.cochran@aebi-schmidt.comJason Mattson216.486.1313 x214 216.486.8423EmailEnlace
Mickey ThompsonMTTNO Field RMA is required unless special order or drop shipment. However; the vendor form must be completed ** CREDIT MAYBE SUBJECT TO INSPECTION OR PICS APPROVED** some parts will be subject to proration credit based on tread depth May troubleshoot in field. Do NOT return Drag tires for stock with out verifying the date code is within 2yrs (nothing over 2yrs should be returned RTS). Do NOT return light truck tires for stock with out verifying the date code is within 3yrs. (nothing over 3yrs should be returned RTS). The date code is located by the bead and will start with CY then the first two digits are the week followed by the year it was manufactured. Obtain DOT # and tread depth from tire. If parts are not deemed a valid warranty the parts will be destroyed. Proof of purchase provided to Meyer. Product can be returned via Meyer. Do Not credit on parts pending warranty as listed below must be returned to Mickey from Meyer for warranty. -All Wheels. -All Sportsman Tires i.e. Sportsman PRO, Sportsman SR and Sportsman Fronts. -All DRAG Tires both front and Rear. Good tires will need to be verified if stock able and will require the date codes from the tires. Do not bring back expired tires -Any Truck tire with a tread separation. -All inner tubesMark Wagoner800.222.9092 ext.3159EmailEnlace
Mile MarkerMMIDO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns. 800.426.8646EmailEnlace
Mishimoto CoolingMIS* CUSTOMER MUST CONTACT VENDOR DIRECTLY WITH ANY ISSUES THEY ARE HAVING WITH THEIR PRODUCT. * For RMA Meyer must go to www.mishimoto.com * SERIAL # is REQUIRED to address warranty issues (located on plate on top of radiator). * Replacements maybe sent direct from vendor. * Parts maybe returned direct to vendor or field destroyed per the direction of the vendor. * Meyer will not transport part(s) that have contained hazardous material. 302.762.4501 x101EmailEnlace
Mob ArmorMBACustomer must contact vendor direct for any warranty issues, will need photo's of the defectcustomer service8002508530EmailEnlace
Morimoto LightingMMLRMA Required must troubleshoot in field, photo's required of the issue and serial number. Will also need to send over the Meyer PO, and if the customer wants refund or warranty also include the shipping address for the client. OEM parts must be returned for warranty service. Vendor does a repair and replace  EmailEnlace
MorrydeMRYField RMA required Meyer to obtain RMA. Vendor will facilitate the return of product or will advised field destroy. Proof of purchase is required (Meyer order #) See vendor website for warranty requirements and guidelines.RETURN GROUP574.293.1581 ext 231EmailEnlace
Motive GearMOGTroubleshoot in field. Field RMA is not required but can be obtained via Meyer Returns.Customer Service800.934.2727EmailEnlace
Moto Metal WheelsMMWCUSTOMER must contact vendor for any WARRANTY, DEFECT, or MISSING Parts claim. PICTURES are Required. FIELD RMA may ONLY be issued to a Meyer Rep.Kenneth800.959.1969EmailEnlace
Mountain Top USALTARMA REQUIRED - CLAIM FORM MUST BE FILLED OUT COMPLETELY AND SENT TO VENDOR, WILL ALSO NEED TO SEND CLEAR PICTURES OF THE DAMAGE AS WELL AS THE SERIAL NUMBERRGA@ltamanufacturing.com EmailEnlace
Mr. Gasket Co.MRGTroubleshoot in field. See vendor website for warranty policiesCustomer Service800.638.0032EmailEnlace
Mr. HeaterMRHRMA Required, will need serial number and proof of purchase. You can register your warranty information on MrHeater.com website. It is at Mr. Heater's sole discretion to replace product or provide service parts.Alicia Graley2165880854EmailEnlace
MSD IgnitionMSDFIELD RMA REQUIRED - CUSTOMER may contact vendor for any INSTALL, WARRANTY or DEFECT claim. 1yr. warranty policy with Repair or Replace option determined by vendor. ** CREDIT WILL NOT BE ISSUED UNTIL RECIEVED BY THE VENDOR **Customer Service888.673.7859 or 800.548.7290EmailEnlace
MTI IndustriesMTITroubleshoot in field any warranty issue, vendor will need item#, purchase date and PO# and pictures of both sides of the unit.janelle warner EmailEnlace
N-Fab IncNFBNO RMA REQUIRED, PHOTOS REQUIRED - Warranties can be returned via Meyer once we have photos of defect/warranty issue. CUSTOMER must contact vendor for any missing parts. 5yr warranty on finish, life time structural/workmanship. * 15% RESTOCK FEE ON NERF BARS *N-Fab866.806.6322 x122EmailEnlace
No Limit FabNLFNo Limit Diesel Attn Jon RMA 21920 5317 Bonsai Ave Moorpark Ca, 93021CUSTOMER SERVICE EmailEnlace
NorcoldNRCall warranty pre-authorization requests can be submitted online, via the Dealer Portal. If you do not have a login username and password, please visit the link below to get setup: https://www.thetford.com/dealer-portal/request-a-dealer-account/ • Merchandise returned without prior approval is subject to refusal.WARRANTY DEPARTMENT8004447210 option 2EmailEnlace
Northern RadiatorNORRMA required - must contact vendor directly for any warranty/ defective issues. Pictures will be required.Traci or Nate EmailEnlace
NOSNOSRMA Required for all defective/warranty items.customer service EmailEnlace
NSA RV Products IncNSACustomer must contact vendor direct for any defective issues. Vendor will repair/fix defective issues and return the product to the customer.Sue6203657714EmailEnlace
OdysseyODYhttps://enersys.my.site.com/EnerSysTransportationWarrantyPortal/s/ Must have serial number, date code, date of sale and model number Email below information to Meyer Returns to file a warranty claim MUST HAVE *Application *Serial number *Date of Purchase *Date of Failure *Voltage as received *Voltage after charging *How was it tested *Battery Voltage @ 15sec *Load applied to the battery ***Testing procedure is available on the vendor's website  EmailEnlace
Old Town Kayak/Ocean KayakJODCustomer must contact Johnson Outdoor Watercraft for any Warranty/Return  EmailEnlace
Optima BatteriesOPTMeyer reps will handle the return with customer. If item falls under warranty and customer fills out the RMA form, item should then be returned back to Meyer. CUSTOMER MUST complete & submit to MEYER the OPT CLAIM FORM with DATE CODE/SERIAL ## we must also get the CCA which is Cold Cranking Amps and test results MUST BE PROVIDED for ALL BATTERY RETURNS, as well for WARRANTY or DEFECT claims (see linked documents) 3yr. WARRANTY (Batteries) A standard battery charger will NOT charge a Optima battery. (it must have an “AGM” setting) * CHARGERS require RMA & CUSTOMER MUST ship to the VENDOR (vendor form is REQUIRED)Mike Dolmetsch615.308.1313EmailEnlace
Oracle LightingORL**BROKEN - VOIDS WARRANTY **-DO NOT RETURN No credit for items missing components No credit for used and working products No credit for damaged / cracked or broken parts No credit for unauthorized alterations of the product Non-custom item when sold as a pair or set. If one component out of the entire set is confirmed defective, credit for full set is allowed.Tech Support800.407.5776EmailEnlace
Owens ProductsOWETroubleshoot any fitment, missing parts issues in the field. RMA is not requiredWarranty/Sales or CSR Mgr Jeanette Lounsbury800.726.9367EmailEnlace
OxygenicsOXYContact vendor for any product/defective issues RMA required.Customer Service7754205600EmailEnlace
Pac Audio AccessoriesPCAMeyer can bring the part back after acquiring the serial number and will then get return authorization to send back to vendor. Must have serial number for return of audio (serial number placement, small clear sticker with black lettering).  EmailEnlace
Pace EdwardsPAEDO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor for RMA and to coordinate any product returns. SERIAL # is REQUIREDTech Dept. or Warranty800.338.3697EmailEnlace
Pacer ProductsPACCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. 800.423.2442 ext.136EmailEnlace
Pacific Performance EngineeringPPECustomer must go to vendor's website and download the warranty claim form complete it return it with the part and any supporting sales documents. Vendor will do a warranty inspection and either issue credit or make adjustments and ship the product to the customer as long as it is under warranty.  EmailEnlace
Paramount AutomotivePMTNON-RETURNABLE FOR ANY REASON. CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. MISSING Parts claims MUST be emailed to Meyer Rep. with deails so parts can be sent direct from the vendor. WARRANTY RMA's will ONLY be issued to Meyer Rep. (Orig. PO MUST be provided as well)Diana Lagunas dianal@paramount-automotive.com909.781.6492EmailEnlace
Patriot ExhaustPEXField RMA required on all defective items  EmailEnlace
PelicanPCNCustomer to submit a warranty claim on the link below or submit an email CSR.warranty@pelican.com https://www.pelicanpro.com/weco(bD1lbiZjPTMwMCZkPW1pbg==)/b2c/app.do?fcode=m_home 8004735422EmailEnlace
Pelican KayakPLCProof of purchase and pictures of the issue are both required; Warranty claim form must be filled in. In the case of kayaks, boats, canoes, and paddle boards, a serial number will be needed.Greg Larson EmailEnlace
Pentair ShurfloSHRRMA Required contact vendor for any warranty/ defective issue. Will need picture of the pump label with manufacture date.RON FRANKLIN Ron.Franklin@Pentair.com EmailEnlace
PerrycraftPERCustomer must contact vendor directly for any install or product issues. 165 Maple Street, Sparta, NC 28675 3363722545EmailEnlace
PertronixPTRTroubleshoot in field. Field RMA Vendor will advise if return or field destroy is necessary. Pictures may need to be required a time of the RMA request. Proof of purchase will be required.Returns909.599.5955EmailEnlace
Peterson ManufacturingPEM* Troubleshoot in field. * Field RMA required and can be obtained by Customer or Meyer Distributing. Vendor will facilitate the return and rework/replacement or field destroy if warranted. * Do not return special order or drop shipments to Meyer. They will need to be returned direct to the vendor. * Missing parts must be reported to the vendor for resolution. ** CONTACT VENDOR OR SEE VENDOR WEBSITE FOR PRODUCT INFORMATION, WARRANTY POLICY AND TERMS ** Proof of Purchase required **CREDIT WILL NOT BE ISSUED UNTIL RECIEVED BY THE VENDOR * DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. * CONCEALED DAMAGES MUST BE REPORTED TO VENDOR.Joni Morris502.493.0097 or 800.821.3490EmailEnlace
Pewag Chain, Inc.PEWTroubleshoot in field. No merchandise will be accepted without prior written authorization. Special order and drop shipments will require a field RMA and must be returned direct to the vendor from the customer. All good returns are subject to a 25% restocking charge, which will be deducted from the amount of the credit memo. Return shipments must be prepaid. Unauthorized shipment will not be accepted.Tammy Knight800.445.2895EmailEnlace
Phoenix USAPHOFIELD RMA IS NO LONGER REQUIRED - ITEMS NEED TO BE RETURNED TO MEYER FOR VENDOR INSPECTION SHIP TO: 51 BORDEN ST, COOKEVILLE TN 38503Julie Land931.526.6128 ext.2289EmailEnlace
PiaaPIATroubleshoot in field. 1 yr warranty on bulbs only (doesn't include full kit). Vendor will not warranty full units for bulbs burnt out. Replacement bulbs can be sent to the customer from the vendor. 800.525.7422EmailEnlace
Pilot AutomotiveWANDefective items require photo'sLuis Banda 18002377560 ext 1>EmailEnlace
PinnaclePINWarranty items need approval/ RMA from vendor before returning direct to vendor do not return to MeyerJeromey Lawson8889351565EmailEnlace
Planet AudioPTASerial nbr must be provided for audio. **Note** Always take the product out of the carton and get the part and serial number off the part. Never use the carton part or serial number off the carton  EmailEnlace
Pop N LockPOPCUSTOMER may contact vendor to TROUBLESHOOT any INSTALL or FIT issue. Vendor may choose to coordinate sending replacements in the field direct. 1 year WarrantyCustomer Service800.342.5911EmailEnlace
Popup Industries, Inc.PUPField RMA is required & must be obtained by customer or Meyer Returns Support prior to return to vendor or Meyer Distributing. Proof of purchase provided to Meyer.Sales800.837.8578EmailEnlace
PortacoolPCLFor any warranty/defective issue please go to www.portacool.com/en/us/support/return-merchandise-authorization and complete the warranty return request form. Will also need a picture of the manufacturer label. If requesting a warranty replacement please have the following information: Model number, serial number and manufacturer date code, purchase date.Returns8006952942EmailEnlace
Power AcousticPOASerial nbr must be provided for audio.  EmailEnlace
PowerBassPBSMeyer will not take any PBS returns, good or defective… Any warranty issue needs to be dealt directly with PBS, Jeff Faulk. Powerbass RA Form (link below) must be used for anything PBS that is trying to be returned to vendor. Serial number must be provided for audio.Jeff Falk EmailEnlace
PowermasterPRMCustomer must call vendors tech line for install and problem solving issues while unit is still on the vehicle. RMA is not requiredFELICIA@POWERMASTERPERFORMANCE.COM6309574019EmailEnlace
PowerstopPSBCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Return address is 6600 River Rd Hodgkins IL 60525Customer Service888.863.4415EmailEnlace
Powertrax/LockrightPTLTroubleshoot in field. Field RMA is not required but can be obtained via Meyer Returns.MUST INCLUDE mmiller@midwesttruck.com ON ALL RMA REQUEST800.934.2727EmailEnlace
Predator TirePDR1.Claim form link. 2.The DOT code pictures with production dates side 3.The serial number/Bar code numbers of each tire. (located on the bead) 4.Tread depth pictures of each tire. 5.Please advise the test data of out of round of each tire. (pictures when possible)  EmailEnlace
PRO Charging SystemsPCSContact vendor for any warranty issues you will need the serial number off the white tag on the ac power cord they will issue RMA to have returned to them where they will repair the charger and have it returned.  EmailEnlace
Progressive DynamicsPDYCUSTOMER MUST CONTACT VENDOR DIRECTLY FOR TECHNICAL HELP THEY MUST BE ABLE TO PROVIDE SERIAL NUMBER (BAR CODE LABLE).RAE BUSKIRK269 781 4241 Extension 149 14EmailEnlace
Progressive IndustriesPOGcustomer must file a warranty claim by going to www.progressiveindustries.net then go to Support and Resources and then Warranty and File a warranty claim  EmailEnlace
ProRYDEPRDCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. 888.813.7933EmailEnlace
PRWPRWTroubleshoot in field. Field RMA Required and can be obtained by Meyer or customer.Shaun Snow888.377.9779EmailEnlace
PullritePLRNon Returnable if not factory sealedNick Moreland EmailEnlace
PutcoPUTCUSTOMER MUST CONTACT PUTCO DIRECTLY FOR ANY DEFECTIVE/ WARRANTY ISSUES ***NON-RETURNABLE TO MEYER MUST BE RETURNED TO PUTCO DIRECTLY FOR EXAMINATION. IF THE ITEM IS DEFECTIVE A REPLACEMENT PART WILL BE SENT DIRECTLY TO THE CUSTOMER. * 90 day for 360's * 1 yr. bulbs (send bulb replacements when applicable) Their contact information is below. 800.247.3974 RMA@Putco.com 800.247.3974EmailEnlace
Pypes Performance ExhaustPYPDO NOT RETURN TO MEYER: Next time this happens, I really wish Meyers tech support & sales people will re-direct these customers directly to us when issues come up instead of taking back the product. It's a waste of time for your people to do this AND it's a waste of money getting the product back AND shipping the product back to us. We ask all of our dealers to have the customers call us directly instead of going thru you all. Take care... Mike Field RMA must be obtained by the customer with the Customer Service @ Pypes. Troubleshoot in field. Proof of purchase will be required. Vendor may require pictures. Do Not return warranty parts to Meyer. Vendor will facilitate return and/or advise on the return and/or replacement of parts when applicable. All parts will are printed on a label and will be tapped to the inside the packaging. All parts will come with a bonus pack that will give customer instructions on install, decal, warranty card and return procedure when applicable. Missing parts will need to be addressed from the field with the Pypes customer service. They will send out missing parts to the customer. Most of the parts will carry a limited life time warranty. See vendor website for warranty updates and requirements.Customer Service / Brandon T. / Dave Gerard800.421.3890EmailEnlace
Quake LEDQAKCustomer must contact vendor directly for any warranty/defective issue. Vendor will work directly with them to resolve any issues if a warranty replacement is needed they will facilitate the return with them.Julia EmailEnlace
Quick Fuel TechnologyQFTTroubleshoot in field. Meyer Rep must contact vendor to get Field RMA. Holley carries a 90day warranty (see vendor website for additional warranty policys. Vendor will advise freight account # to ship parts back to the vendor direct from the customer. BEP Holly Carbs & pumps 90 days with product replacement no credit. Troubleshoot in field and field RMA can be obtained by Meyer Rep with a call tag pick up from the customer. Contact is Customer Service 1-800-638-0032Customer Service800.638.0032EmailEnlace
QuietKatKATRMA REQUIRED----Please email the contact directly https://quietkat.com/support Proof of the original purchase may be required with any warranty request. Before making a claim, please contact our service department as there may be a simple fix for the problem. 970.328.2399EmailEnlace
Qwik LinerQKLDO NOT RETURN WARRANTY PRODUCT TO MEYER. Field RMA is required and vendor will need to facilitate return. CUSTOMER must contact Meyer for resolution in the field. 800.989.9869 ext 203EmailEnlace
RACE GASRCGdestroy in fieldTom Van Buren 8557223427EmailEnlace
RacelineRCLRMA Required for warranty/ defective issues. Vendor will need pictures of issue as well as PO that it was purchased on.Val Peura or Pricilla Brewer7148934160EmailEnlace
RacepakRPKFIELD RMA REQUIRED - CUSTOMER may contact vendor for any INSTALL, WARRANTY or DEFECT claim. 1yr. warranty policy with Repair or Replace option determined by vendor. ** CREDIT WILL NOT BE ISSUED UNTIL RECIEVED BY THE VENDOR **Customer Service888.673.7859 or 800.548.7290EmailEnlace
RacequipRQPTroubleshoot in field. Field RMA required and can be obtained by Meyer Returns Support. Carries a 90 warranty Pictures maybe required. See attached warranty guidelines or vendor website for any updates on warranty guidelines and procedure. Safety Returns Ship to Location: HOLLEY PERFORMANCE PRODUCTS SAFETY RETURN GOODS DEPARTMENT 328 FM306 New Braunfels, TX 78130customer service800.638.0032 option 3EmailEnlace
Racing Power CompanyRCPTroubleshoot in field with Raul X120. RCP carriers a 1yr warranty.iroman@usrpc.com800.558.3690EmailEnlace
Ram ClutchRMC* Troubleshoot in field. * Field RMA required. * Vendor may facilitate pick and repair/replace to customer. ** CREDIT WILL NOT BE ISSUED UNTIL CREDIT IS RECIEVED BY THE VENDOR. * Warranty returns must include sales receipt and proof of flywheel resurfacing. NO EXCEPTIONS * The attached form will need to be completed and submitted at time of RMA request. * Make sure you have reviewed the vendor warranty page and that your product is eligible for return. http://www.ramclutches.com/ * All products returned to RMC must be shipped prepaid. Please use a shipping service that can provide you with a tracking number for your package. Use online package tracking to determine when the package arrives at RAM. CLUTCHES ARE HEAVY AND SHARP! Package your clutch so it will arrive without damage. BE SURE to include the attached RAM (RMC) CLUTCHES RETURN REQUEST FORM! Ship to: RAM Clutches, 201 Business Park Blvd., Columbia, SC 29203. ** PERFORMANCE SETS AND COMPONENTS Due to the intended use of these products, warranty is limited to 30 days for correct fit to the specified vehicle, provided there are NO modifications or changes to driveline, tire & wheel diameter, or release mechanisms from factory original components, except as specified as necessary by RAM, and parts are installed as specified by RAM, and any recommended accessory items have been installed. Since this product is a consumable item, no warranty is offered or made for durability or specific performance. This product is intended for installation by qualified installers and hobbyists. RAM will not be liable for installation labor or vehicle downtime if it becomes necessary to return alleged warranty items to the factory for evaluation. ** Street Dual Disc units Street dual disc clutches are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection. ** Flywheels RAM flywheels are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection. ** Hydraulic release bearings Hydraulic release bearings are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection.Customer Service/Warranty Returns803.788.6034EmailEnlace
Ram MountRMMtroubleshoot in field RMA required  EmailEnlace
Rampage ProductsRAMCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. ANY cut wires, broken items, or alterations will VOID warranty credit.Customer Service800.241.7219EmailEnlace
Ranch HandRNHRETURN TO VENDOR. FIELD RMA REQUIRED ON DEFECTIVE/WARRANTY/DAMAGE CLAIMS WHICH WILL REQUIRE PICTURES OF PART AND PACKAGING. MEYER WILL PROVIDE PO #. PAINT IMPERFECTIONS are inherent due to the nature of the product and is NOT a reason for return - touch up paint will be provided. * * 15% RESTOCK FEE ON TOOLBOXES/BUMPERS/GR.GUARDSreturnsdepartment@curtgroup.com361.594.4608EmailEnlace
Rancho SuspensionsRHONO Field RMA required CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues.McCormick, Shane 734.243.7750EmailEnlace
Range TechnologyRNGFIELD RMA Required for WARRANTY - SERIAL number MUST be provided for ALL returns. CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. VIN locked items will VOID credit.customer service888.360.3343 option 4EmailEnlace
RaptorRAP*Photos of Defect Required. *NO RMA REQUIRED ON STEPS/RUNNING BOARDS * CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. * Vendor field RMA is required on Jeep tops for leaking only or approval from Nick G or Adam F. see attached link * Raptor may send out step pads with in 1yr warranty and or misc. parts on a case by case basis to assist with customer installs in field (must fall within warranty or there will be a charge for the replacement parts). * The following must be provided at the time of return requests for any fitment issues and/or tech support assistance: 1. Customer Name 2. Address 3. Phone # of Customer 4. PO# if applicable 5. Part # 6. Description of issue 6. Pictures if needed 7. Where was product purchased 8. What is the resolution (need bolt, bracket or single bar to fix issue) 877.769.3765EmailEnlace
Raptor Series Off-RoadRSOContact vendor for missing parts, missing or damaged hardware, replacement parts. Customers have 30days to return product that is ordered wrong or damaged after the 30days these products are no longer able to be returned 5102985516EmailEnlace
RCV PerformanceRCVCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Pictures may be requested for RMA/Warranty issues. Limited Life on breakage but NOT on normal wear & tear.Josh Ortgiesen815.877.7473 ext. 5700EmailEnlace
RDSRDSCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Pictures and SERIAL # may be requested. MEYER REP must contact vendor for FIELD RMA on any USED or DEFECTIVE tank. Used tanks are not to be returned to Meyer. * 15% RESTOCK FEE ON ALL TANK RETURNS *Janet850.584.6898EmailEnlace
Readylift Off Road SuspensionRORTrouble shoot in field. * Field RMA required. * Vendor will advise RMA/RGA with direction on the return of the product. Vendor may facilitate a field return.Returns - Vim Youssefian Steve Robinson800.549.4620EmailEnlace
ReadyLift SuspensionRDYCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. 800.549.4620 ext.210 ext.20EmailEnlace
Rear View SafetyRVSRMA is required for all warranty/ defective issues, vendor will also need PO/invoice information as well as reason for exchange or return. There are 2 ways to go about the RMA Process. 1. Regular RMA - vendor waits for the unit and sends back a working replacement 2. Advanced RMA - vendor ships out replacement that is paid for once confirmation is received it works a refund is issued.Priscilla Vela8007641028EmailEnlace
Recon Truck AccessoriesREC90day warranty for lighting product from when sold to the end customer. Required proof of purchase within 90days. Troubleshoot with the vendor. 877.377.3266 or 561.771.1183EmailEnlace
Reflexxion/Diamond StandardREFTroubleshoot in field. Field RMA is not required. Lot # is required on the RGA request and can be found on the inside of the bumper. Pictures maybe required. REFLEXXION PARTS CARRY A 3-YEAR WARRANTY TO THE ORIGINAL OWNER FOR DEFECTS IN MATERIALS OR WORKMANSHIP. DAMAGE CAUSED BY ROAD HAZARD OR MISUSE IS NOT COVERED. ALTERED, REWORKED, OR PAINTED PARTS ARE NOT COVERED UNDER THIS WARRANTY. THIS WARRANTY IS NON-TRANSFERABLE See vendor website for any warranty updates.Amanda Joyce800.565.8424EmailEnlace
Remco IndustriesRCOTroubleshoot in field. Remco parts carry a 1yr limited warranty. Customer will need to provide the serial # from the part see vendor website for any warranty and product updates. http://www.remcoindustries.comAnnie Eidem763.253.4753EmailEnlace
RetraxRTXSerial # is required. Please indicate in the description if you would prefer credit or a replacement. 701.746.5596EmailEnlace
Rev Wheels/Carroll Shelby/Legendary/Rocket Racing/Halibrand/HK WheelsHBWTroubleshoot in field. Meyer Rep must contact vendor to get Field RMA. Holley carries a 90day warranty (see vendor website for additional warranty policys. Vendor will advise freight account # to ship parts back to the vendor direct from the customer. BEP Holly Carbs & pumps 90 days with product replacement no credit. Troubleshoot in field and field RMA can be obtained by Meyer Rep with a call tag pick up from the customer. Contact is Customer Service 1-800-638-0032Customer Service800.638.0032EmailEnlace
Rhino-Rack USARHRRMA required will need to supply a PO # , must contact vendor directly for any install issues, missing items.Customer Service303.706.9700EmailEnlace
Richmond Gear/Motive GearRIC* Troubleshoot in field. Motive Gear Tech @ 800-934-2727 x 3718. Richmond Tech @ 800-934-2727 x3880 * Field RMA required via Meyer Returns.Marcy Miller800.934.2727EmailEnlace
RidetechRIDMEYER TO OBTAIN FIELD RMA after customer troubleshoots in the field. DO NOT RETURN TO MEYER. VENDOR WILL FACILITATE RETURN FROM THE FIELD. See vendor website for additional warranty requirements and guidelines. DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD. 812.481.4706EmailEnlace
Rigid IndustriesRIGTroubleshoot in field. FIELD RMA is not REQUIRED Pictures may be requested. Vendor may coordinate WARRANTY pickups direct or send replacement parts. Trouble shoot any install issues with Customer Service.Warranty Dept. or John Roney855.760.5337EmailEnlace
RJS Safety ProductsRJS* Troubleshoot in field. * Field RMA can be obtained by the customer or Meyer Returns. * 1yr warranty on defect and workmanship. * Pics maybe required. * Proof of purchase required. * See vendor website for any warranty updates. ** Any modifications to product will void any and all warrantees.Steve561.622.2059EmailEnlace
RKIRKICUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. * MEYER REP must contact VENDOR for WARRANTY claims, Quality Assurance (QA) # and PICTURES and serial #'s maybe REQUIRED. The vendor will advise and may require a rework/return to customer. * 15% RESTOCK FEE ON THIS LINE * * Credit will not to be issued until credit is received from vendor or rework is returned to customer. * Meyer will not transport part(s) that have contained hazardous material.Dick Pyke or Priestly Ledger800.346.8988EmailEnlace
Road ArmorRDACUSTOMER must contact vendor directly on the following issues fitment (pictures required as well as make, model and year of vehicle), install issues, manufacturing defects, hardware or bracket questions and quality concerns. Defects are defined as any imperfections which impair the use of the product for which it was intended. Powder Coating is warrantied for a 90 day period from ship date. Road Armor Lights will have a sticker on them showing the QC pass with date all products have a 1 year non-transferable Limited Warranty. Quake LED will be repaired/replace if they determine the product is defect please contact them directly at Orders@quakeled.com Rust Olem textured paint code #7220 black can be used to touch up as needed.Pete877.294.2726EmailEnlace
Rock Krawler SuspensionRKRRMA Required for technical issues contact technical support all other issue contact customer service. Photos and invoice required for RMA.Customer Service5182709822EmailEnlace
Rock Tamers, LLCRTAFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. PICTURES may be requested. Vendor may coordinate WARRANTY pickups direct or send replacement parts to resolve.NOAH HENSLEY800.545.1894EmailEnlace
Roll-N-LockROLSerial # required. Vendor will be contacted by Meyer 800.952.7655EmailEnlace
Rolling Big PowerRBPFIELD RMA REQUIRED (Provided ONLY to Meyer Rep.)- CUSTOMER must COMPLETE the RBP Return form & provide PICTURES(see linked document)to Meyer Returns Support for ANY WARRANTY Claim. CUSTOMER may contact vendor for any INSTALL issues. *1yr. warranty * 15% RESTOCK FEE ON TOOLBOXES/BUMPERS/GR.GUARDS *customer service951.272.9090EmailEnlace
RomikROM* Field RMA required must login to vendor portal to request RMA https://romik.com/rma/guest/login/ * Serial # and pictures may need to be supplied. * Missing parts will need to be addressed with vendor from the field. Vendor will send missing parts to customer.Returns / Tech Support866.717.6645EmailEnlace
RotopaxRPXcontact vendor for warranty issues will need photo's of issues. Vendor will instruct how they will proceed. 8012991885EmailEnlace
Royal PurpleROYDO NOT RETURN WARRANTY PRODUCT TO MEYER. CUSTOMER must contact Meyer SALES Rep for resolution in the field.  EmailEnlace
Rugged LinerCOLSERIAL number MUST be provided for opened returns on TONNEAU COVERS. FIELD RMA REQUIRED on WARRANTY Tonneau Covers ONLY (NOTE: ATTENTION Before opening verify part # & application). CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. PICTURES may be requested. * 25% RESTOCK FEE ON BEDLINERS *james.mckay@realtruck.com for PICKUP OF SKIDS800.433.3604 x133EmailEnlace
Rugged Off Road SuspensionRUGCUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues.  EmailEnlace
Rugged RidgeOMIMEYER REP must contact vendor for Field RMA. RMA request MUST BE EMAILED TO VENDOR with Reason for return & entire Meyer PO #. Missing parts can be handled from the field. DO NOT RETURN TO MEYER, ITEMS MUST BE SENT TO THE VENDOR. Vendor will not issue credit but replace parts insteadRGA@omix-ada.com770.614.6101x224EmailEnlace
RV DesignerRVDMeyer must contact vendor directly for any defective issues or missing parts.Customer Service EmailEnlace
RV Lighting IncRVLLED Strip Light or RV Programmable connector there should be no exchange or credit customer must contact vendor directly to resolve issues. For defective product other than the LED Strip or RV programmable connector RMA can be obtained by emailing the vendor the following information Dealer Name, address and part # to return, picture of defective item. 4186143742EmailEnlace
SaddlemanSDLNo Returns on Face MasksGuy Hartog9738128820EmailEnlace
Samlex AmericaSAMTroubleshoot with Tech or Warranty support in field with vendor. Damages must be reported with in 24-48hrts. Concealed damages must be reported to the vendor.Tech/Warranty Support800.561.5885EmailEnlace
SCE GasketsSCEEnd user must contact vendor tech line for install and problem solving issues.Customer Service9313982204EmailEnlace
Scorpion Protective Coating, IncSCRFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. Vendor may coordinate the pickup or replacement direct. * IF SEAL IS BROKEN RMA IS REQUIRED * 1 YR. product self lifeKelly Lewis - Tech Support800.999.6841EmailEnlace
Scorpion Window FilmSWFTroubleshoot in field. Field RMA is required and maybe obtained by the customer. Lot# off the box & pictures will be required when calling for Field RMA. Customer will advise vendor in detail the issues they are experiencing. Vendor will advise if part is to be returned for further inspection. See vendor website for warranty terms: www.ScorpionWindowFilm.comKelly Lewis765.653.2906EmailEnlace
SCT PerformanceSCTCUSTOMER must TROUBLESHOOT any WARRANTY, INSTALL, or MISSING PARTS claim. SERIAL # required for all performance product returns. Warranty returns on Performance parts must have been registered or customer will be charged a minimum $65.00 processing fee. This fee will be assessed if the part is not registered and returned for warranty outside 1yr from the date part was registered. VIN locked items will VOID credit. 1yr warrantyKrysta Wilson407.774.2447 ext.288EmailEnlace
Simpson RacingSIPRGA required for Safety and Performance Parts. Safety Returns Ship to Location: HOLLEY PERFORMANCE PRODUCTS SAFETY RETURN GOODS DEPARTMENT 328 FM306 New Braunfels, TX 78130 8006380032 Opt 3EmailEnlace
SionyxSYXRMA Required. Sales receipt/proof of purchase indicate date of purchase, amount paid and place of purchase.Frank Mastrorilli EmailEnlace
Skyjacker SuspensionSKYField RMA required please contact vendor directly with any warranty/defective item issues. Product finish is not covered under warranty please do not return to Meyer for these issues, paint chipping, rustingCustomer Service318.388.0816EmailEnlace
SmittybiltSMBCustomer must contact the vendor directly with any issues on winches so they can be diagnosed in the field  EmailEnlace
Sound StreamSSMSerial nbr must be provided for audio.Annie Cruz EmailEnlace
Southwire Company, LLCTRCCustomer must contact vendor directly to troubleshoot any defective issues. RMA may be given to have items returned to vendor for evaluation to determine if unit is defective. Our warranty does not cover physical damage to the unit as this was not a defect from manufacturing. 8007804324EmailEnlace
sPODSPDPlease contact vendor directly to Troubleshoot any issues prior to uninstalling your entire system. RMA required, will need a copy of original invoice. 1 year limited warranty on mechanical components and a 90 day limited warranty on electronic parts and components from manufacturers defects from the date of purchase. Vendor will repair/ replace items in question. Any modifications void warranty.  EmailEnlace
Spyder AutomotiveSPYRMA Required on all defective/warranty items. no replacements sent, will send a call tag if within 30 days. 6269348884EmailEnlace
Stainless Steel BrakesSSBNON-RETURNABLE TO MEYERc.harris@ssbrakes.com EmailEnlace
Star Brite / Star-TronSTBDO NOT RETURN WARRANTY PRODUCT TO MEYER. CUSTOMER must contact Meyer for resolution in the field. If warranty is needed the vendor will request the retain # off the bottle.Eric Hahn EmailEnlace
Steelcraft AutomotiveSTCDOP (Production Date) is REQUIRED for WARRANTY return. Customer may TROUBLESHOOT with vendor prior to contacting Meyer. * 3yr. Limited Warranty on black * LIFETIME on upgraded Stainless SteelSHAE888.261.4537EmailEnlace
StingerSGRMeyer can bring the part back after acquiring the serial number and will then get return authorization to send back to vendor. Must have serial number for return of audio (serial number placement, small clear sticker with black lettering)  EmailEnlace
StingRay HydrofoilSRYRMA REQUIRED FOR ALL WARRANTY/DEFECTIVE ITEMS  EmailEnlace
STKSTKDiscontinued parts are not warrantable. CUSTOMER must DRY FIT ALL parts PRIOR to INSTALL and TROUBLESHOOT any INSTALL issue in the field direct with vendor. * 1yr. warranty against mfg. defects Part may be returned via Meyer if purchased within 1yr. warranty against mfg. defects. Part(s) will need to be determined if they are Fink, Premier or STK. Attempt to discount good parts in field as STK was part of Armor Deck. See Buyer for direction on stocking parts. Attempt to discount good parts in field as STK. See Buyer for direction on stocking parts.  EmailEnlace
Sun Coast ConvertersSNT* Troubleshoot warranty from the field. Customer is required to contact Sun Coast customer service at(850)864-2361. * Field RMA required and can be obtained by Meyer Returns Support with the required PO # for proof of purchase. Read and complete the attached vendor form for return authorization and credit review. * Vendor will advise how the parts will be facilitated. Vendor may require part to be reworked and returned to the customer with no credit. ** Do Not Credit customer till vendor credit is received. ** See Vendor website for warranty policy & terms 850.864.2361EmailEnlace
SuncastSNCCustomer should contact vendor for missing parts 800-846-2345. 8008462345EmailEnlace
SuperchipsSPCFIELD RMA REQUIRED - SERIAL # required for performance product returns. CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. VIN locked items with out vendor RMA's will VOID credit.Customer Service407.585.7000 option 4EmailEnlace
SuperliftSPLFIELD RMA REQUIRED - CUSTOMER must contact vendor for any INSTALL issue or WARRANTY claim.Christina.McKeigan@superlift.com800.551.4955EmailEnlace
SuperSprings InternationalSUPTroubleshoot in Field. CUSTOMER must contact vendor for FIELD RMA. Pics maybe required. Vendor will advise if parts are to be returned via Meyer or field destroyed. Proof of purchase provided to Meyer. 800.898.0705EmailEnlace
SwagmanSWGTroubleshoot in field. Field RMA required and to be obtained by the customer. Vendor will require the 4digit Batch # off the part and may require pictures of the failure. Vendor will facilitate the return in the field or field destroy.Customer Service800.469.7924EmailEnlace
Swift HitchSWHDO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns. 617.600.8230EmailEnlace
SynergySYNRMA Required on all defective items. Customer should reach out directly to Synergy. 8052420397EmailEnlace
T-Rex GrillesREXPlease see attached form for vendor information needed to troubleshoot any warranty issues in the field. Vendor will require pictures and PO# on all REX parts.  EmailEnlace
Taylor Wire / VertexTAY* Troubleshoot in field. * Field RMA required and maybe obtained by Meyer Returns Support. Pictures maybe required * Vertex magnitos will have serial #’s that will need to be advised at the time of the return request. * All warranty returns are subject to vendor inspection. * Missing parts must be reported to the vendor *DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. *CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD.John Bugh - Returns816.765.5011EmailEnlace
Tecmate / OptimateTCMRMA required vendor will need serial number, proof of purchase, video of the issue 8443372095EmailEnlace
TekonshaTEA** NO RETURN FOR MISSING PARTS/HARDWARE ** Meyer Sales Rep must contact vendor for any missing parts. Customer must supply the date code on the product when making your request. Parts will be sent directly to the customer.Ben Sanchez877.696.7508 x7EmailEnlace
Ten FactoryTFCTroubleshoot in field. Field RMA is not required but can be obtained via Meyer Returns.Customer Service800.934.2727EmailEnlace
TeraFlexTERTroubleshoot in field. Field RMA required. Vendor will advise and facilitate the return or replacement. Serial will need to be provided on axles and any forged/cast parts when requesting the RMA. Vendor may request pictures or additional information from the packaging such and manufacture date codes. See vendor website for warranty policies 801.713.3314EmailEnlace
TFPTFP* Field RMA required. Vendor will facilities any returns or field destroy. * Do not return to Meyer * See Buyer for approval on good stock returns.Din Villanueva or Edward Martinez800.949.1370 x20 or x10EmailEnlace
ThetfordTHEall warranty pre-authorization requests can be submitted online, via the Dealer Portal. If you do not have a login username and password, please visit the link below to get setup: https://www.thetford.com/dealer-portal/request-a-dealer-account/ 8004447210EmailEnlace
Thin LiteTHLLenses and tubes are not covered under any warranty. Ballasts have a one year warranty.Thin-Lite Closed its doors Dec 15 2022. Permanently EmailEnlace
ThuleTHUFIELD RMA REQUIRED - CUSTOMER must contact vendor for any INSTALL issue or WARRANTY claim.Susan866.984.8539 3EmailEnlace
TimbrenTIMRMA REQUIRED CUSTOMER MUST CONTACT VENDOR FOR ANY MISSING PARTS, DO NOT RETURN WITHOUT APPROVAL ** DO NOT RETURN WARRANTY PRODUCT TO MEYER. Customer MUST contact the vendor to coordinate any product returns. 800.263.3113EmailEnlace
Titan Fuel TanksTFTSERIAL # REQUIRED ON ALL TANKS. RMA required. NO RETURNS ON SCRATCHED OR DAMAGES as these are under the vehicle. Warranties for manufacturing defects. If an item has signs of a manufacturing defect the end consumer should contact Titan’s technical team at 800-728-4982. All warranty claims for manufacturing defects should come through Titan Fuel Tanks. All warranty claims for manufacturing defects will require the following • Titan Item number • Serial number of the item • Pictures of the defect 800.728.4982EmailEnlace
Tommy GateTOMCUSTOMER must contact vendor to TROUBLESHOOT any WARRANTY, FIT, or INSTALL issues. SERAIL # is REQUIRED.JAMES ARCHER800.543.8428EmailEnlace
Tonno ProTNPTroubleshoot in field. Field RMA will only be issued on field destroys and is no longer needed for parts that will be returned to TNP from Meyer via a bulk return. Michele @ TNP requested that Returns Support contact her on the individual requests and she would advise if the parts are to be field destroyed or returned to TNP. Pictures will be required to determine a return or field destroy. SERIAL number MUST be provided for ALL returns. Serial number located on the front crossbar on the passenger side. CUSTOMER must contact vendor for any INSTALL, fitment and warranty issues. The vendor will advise if a return or replacements sent to the customer will be needed and or required. See vendor website for additional warranty guidelines: http://www.tonnopro.com/warranty.htmCustomer Service812.827.2110EmailEnlace
Torklift InternationalTRK* Field RMA is required. Vendor will advise if replacement parts are required. You must register to get RMA. * Pictures and proof of delivery will be required at the time of the RMA return request. * see vendor website for warranty policy and terms http://www.torklift.com/index.php/resources/warranty-registration Torklift warrants its hitches, custom hitch receivers, frame mounted tie downs, turnbuckles, and accessories (excluding wire harnesses which carry a 90 day warranty and the plastic components of the GlowGuide handrail carry a 1 year warranty) from date of purchase against defects in material and workmanship under normal use and service for the ownership life of the original consumer purchaser.Customer Service800.246.8132EmailEnlace
Toyo Tires U.S.A. CorpTOYCUSTOMER must contact vendor for any INSTALL OR WARRANTY issues. Vendor will issue a Field Tag to return to them. DO NOT RETURN TO MEYER. Field Claim number is required for return. PICTURES are REQUIRED. CUSTOMER must complete the TOYO "LIMITED WARRANTY CLAIM FORM" (see linked document). FOR NO REGRETS CLAIMS - BOTH claim forms MUST be COMPLETED and sent to Meyer Returns Support with the Meyer return request. "No Regrets" program. Go to http://toyotires.com/sites/default/files/page-files/NoRegrets_ReturnForm_060713.pdf * NO REGRETS applies ONLY to 45day/500miles for all 4 tires (MT tires not available on "No Regrets" program) * CREDIT WILL ONLY BE ISSUED AFTER VENDOR INSPECTION AND VALIDATIONCLAIMS DEPT800.557.8696 Fax 518.326.570EmailEnlace
Trac-RacTRAFIELD RMA REQUIRED - CUSTOMER must contact vendor for any INSTALL issue or WARRANTY claim.Geoff Aldrich800.501.1587EmailEnlace
TraxdaTXXCUSTOMER must contact vendor to TROUBLESHOOT any WARRANTY, FIT, or INSTALL issues. Vendor may coordinate WARRANTY pickups direct or send replacement parts to resolve.Sales888.803.1562EmailEnlace
Tri-Lynx CorporationTLXTroubleshoot in field. See vendor website for warranty guidelines and requirements. Swagman offers a limited lifetime warranty to the original purchaser of any Swagman product. This warranty covers manufacturer’s defects only and does not include normal wear and tear.Warranty/Customer Service800.469.7924EmailEnlace
Trim IllusionSESRETURNS ADDRESS: Trim Illusion Returns Department 14205 Woodcliff Court, Suite 104 Bowie, MD 20720 CUSTOMER must DRY FIT parts and contact vendor to TROUBLESHOOT any WARRANTY or INSTALL issues. Vendor may send replacement parts to resolve.MOE866.519.6959 x1007EmailEnlace
Trimax LocksWYEContact vendor to TROUBLESHOOT any FIT or INSTALL issues. 90day warranty on RAZOR parts & does not cover painted, chrome or any other finishes. TS32 & THSP2C rusting is not a warranty issue. Meyer customers will need to contact Jim Sentz directly on RAZOR warranty issues and it will be determined if will be repaired or replace any determined defective items for a period of 90 days from original date of purchase. 303.796.8500EmailEnlace
Truck Covers USATCUMEYER REP must contact vendor for Field RMA - SERIAL # and COPY of WARRANTY REGISTRATION is REQUIRED. CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Vendor will determine if parts can be sent direct. * 2YR WARRANTYKim Tremelling858.622.9135EmailEnlace
Truck TrolleyTLYTruck Trolley® products will be free from defects in material and workmanship from the date of purchase and continuing for a period of one (1) year. For warranty claims please provide the following... 1. date of purchase 2. A brief description of damage 3. picture of damaged part/component 4. pic of manufacturers date wheel (found on backside of each TT-2201 Truck Trolley half).Andrew Wiess9892629595EmailEnlace
Truck-Lite Co.TLCMEYER REP must contact vendor for Field RMA for ALL RETURNS or Credit will be DENIEDEd Ruediger519.770.4000EmailEnlace
TruxedoTRXFIELD RMA REQUIRED ON WARRANTY/DEFECTIVE RETURNS ONLY. SERIAL number and Date Code (found on the underside of the cover) MUST be provided for ALL returns. CUSTOMER must contact vendor for any INSTALL issue. Pictures may be requested. Vendor will facilitate pick up or repairs if needed.Jennifer Teichroew877.878.9336EmailEnlace
Trynex/ Pace, Inc.TRYDo not return warranty parts to Meyer. Field RMA required by Meyer Returns Support. PACE will handle the warranty request with Trynex. Contact Matt at (800) 686-3128 x1112 or via email mattf@pacelink.com All good seasonal parts will need prior buyer approval before returning to Meyer.Matt800.686.3128 x1112EmailEnlace
Tuff CountryTUFTroubleshoot in field. Field RMA is not required. Missing parts will need to be addressed with vendor in the field. see vendor website for warranty guidelinesCustomer Service/Return801.280.2777EmailEnlace
Tuxedo Auto EquipmentMEQCustomer must contact vendor for any warranty issues, pictures will be required, serial number required. Vendor can send out parts as well as touch up paint. 1 year warranty on parts and 5 year warranty on structure.Amber Peikert8175589337EmailEnlace
Ultra Fab Products, IncULT* Troubleshoot in field. * Field RMA required and to obtained by customer. * Vendor will advise if part will be picked up via call tag or field destroyed. * See Vendor website for warranty terms.Randy Clay800.860.7571EmailEnlace
UnderCoverUNDIf bands are cut, please contact Undercover at the provided email. If bands are not cut, please complete the form and a Meyer representative will contact UND. Serial # required.Tony Dollarhide866.900.8800 ext.612EmailEnlace
Unique Truck AccessoriesUNIFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY, DEFECT, or INSTALL issues 1 year warranty applies. PICTURES (if applicable) may be requested. FIELD RMA may ONLY be issued to a Meyer Rep. * 15% RESTOCK FEE ON SOME ITEMS ON THIS LINEAmber800.239.2343 ext.28EmailEnlace
United Engine & Machine CoSLVPlease contact vendor for any defective/warranty issue.Lorraine Contreras EmailEnlace
United Truck PartsDMITroubleshoot in the field. RMA is required and will be requested by Meyer. Proof of purchase is required.Jim Feasel260.824.6270EmailEnlace
UWS/United Welding ServicesUWSPhotos are required of damages MEYER REP must contact vendor for Field RMA on warranty/defect parts. The Serial # and pictures of Serial label off the product will be required at time of return request. Damages on Fuel Tanks & Tool Boxes (UWS or PMXT) are not considered “warranty” and will have to be addressed/refused at time of delivery. All damages will need to be advised within 24-48 hrs. of receipt. Pictures of packaging and the product will need to be provided along with proof of purchase. UWS tool boxes carries a 1yr warranty. * 15% RESTOCK FEE ON TOOLBOXES/BUMPERS/GR.GUARDS/ TANKS * Do not return used fuel tanks. Field RMA is required on all used fuel tanks. Proof of purchase provided to Meyer within 1yr on Fuel Tanks and Tool Boxes. Customer will need to remove plate with Code from Fuel tank and the plate can be returned via Meyer. Vendor may facilitate pick up Fuel Tank and/or Field Destroy if needed. Rust on steel boxes is not a manufacturer's defect and will not be able to warranty. CONCEALED DAMAGES MUST BE REPORTED TO VENDOR. VENDOR MAY WANT TO FACILITATE FROM THE FIELD. SEE VENDOR WEBSITE FOR ANY UPDATES ON THEIR WARRANTY POLICY. * Meyer will not transport part(s) that have contained hazardous material. 800.432.4685EmailEnlace
Valley Chrome Plating, Inc.VCP* Troubleshoot in field. * Field RMA required and maybe obtained by Meyer Returns Support. Pictures maybe required * Do not return special order or drop shipments to Meyer. They will need to be returned direct to the vendor. * All warranty returns are subject to vendor inspection. Vendor will facilitate the return and rework/replacement if warranted. **CREDIT WILL NOT BE ISSUED UNTIL RECIEVED BY THE VENDOR * Missing parts must be reported to the vendor ** CONTACT VENDOR OR SEE VENDOR WEBSITE FOR PRODUCT INFORMATION AND WARRANTY POLICY ** Proof of Purchase required * DAMAGES MUST BE REPORTED WITH IN 24-48 HRS. * CONCEALED DAMAGES MUST BE REPORTED TO VENDOR.Sales/CSR800.354.0976EmailEnlace
Vance and HinesVAHVendor will provide RMA numbers for return. Nothing should be returned without an RMA from Vance and Hines. Warranty 1 year from purchase date. Picture and a brief description of the problem along with a copy of receipt.  EmailEnlace
Vantage PointGLACUSTOMER must contact vendor to TROUBLESHOOT any WARRANTY, FIT, or INSTALL issues. * RMA request for warranty issues must be made with in 60 days of purchase.Customer Service866.546.8825EmailEnlace
VelariumVELReturn to vendor/handle in the field. Photos required.mbenedict@airxcel.com EmailEnlace
Viair CorporationVIAFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY, DEFECT, or INSTALL issues.Jessy949.585.0011 ext.110EmailEnlace
Vibrant PerformanceVIBTroubleshoot in field. Field RMA to be obtained by Meyer. The vendor will advise method of return or field that may or may not include the repair and return of part(s) sent for warranty evaluation. Provide proof of purchase.Tech: Aaron or Jay RGA's: Tina905.564.8644 Aaron x254 Jay x2EmailEnlace
VIN Specific EngineeringVSERequest an RMA for the item you wish to return and verify the item is returnable. Prepare your package in original packaging, with all parts, pieces and paperwork that were included when delivered. Print shipping label that will be emailed to you and affix it to the outside of the packaging box. Return your item via your preferred shipping provider. NOTE: If return is due to an improperly or incorrectly shipped item from Vin Specific Enterprises LLC, your label will be freight-prepaid. All other returns are not pre-paid. Upon receipt of your return,Vin Specific Engineering will inspect your item and issue a refund according to Vin Specific Enterprise's refund & restocking fee policy. Please ask prior to returning your part if a restocking fee is likely to apply. Some parts have a required 15-35% restocking fee based on manufacturer policies which we will charge to you and deduct from your refund or in-store credit. Refunds will take up to 10 days to process.Cam Dohlse833.789.7700EmailEnlace
Vision XVIXFIELD RMA REQUIRED - CUSTOMER must contact vendor for any WARRANTY or DEFECT claim. Defective returns will be handles in a repair/replace basis to the customer.Returns/Customer Service888.489.9820 or 253.218.2900EmailEnlace
VMP PerformanceVMPThe selling dealer must receive a Return Merchandise Number from VMPJake Montoya EmailEnlace
Volant PerformanceVOLFIELD RMA REQUIRED - CUSTOMER must contact vendor for any MISSING PARTS, WARRANTY or DEFECT claim. Volant products used for racing are non returnable under any circumstances. One year limited warranty from the date of retail purchase. Volant will repair, replace or issue a credit to the distributor at Volant’s optionMike Meyer4408910999EmailEnlace
VOXX ElectronicsVOXVox Seatback and Headrest monitors must be troubleshooted from the vender through Technical Support at 1-800-371-7725. Serial nbr must be provided.Christine Guthlein EmailEnlace
Wagan CorporationWAGRMA required vendor will need a valid PO when requesting an RMA.Roxanna Ramon5104719221EmailEnlace
WarnWARCustomer with a New Warn product that experiences out of the box failure should contact Warn customer service 1st for support to diagnose. After speaking with Warn CS, if it is deemed an out of the box failure then Warn can supply RMA. Then customer can return to Meyer and winch will be inspected during quarterly warranty inspection. Customer must contact Warn to resolve issues in the field of existing products. NO RETURN FOR MISSING PARTS or Installed and used by customer. Customer must contact the vendor to resolve in the field.Stan Mcintire503.722.3040EmailEnlace
Waterport LLCWTS* Troubleshoot in field. * Field RMA is required and must be obtained by the customer. Vendor may facilitate from the field. * Special order and drop shipments will need to return direct to vendor with Field RMA. * Missing parts will need to be address with vendor in the field. Damages must be reported with in 24-48hrs. Concealed damages must be reported to the vendor. See vendor website for additional warranty guidelinesCustomer Service888.685.GEAR or 828.665.1007EmailEnlace
Watts Water QualityWATVendor must be contacted for RMA on any warranty/ defective item.Eileen Dinser EmailEnlace
WeatherguardWEAMEYER REP must contact vendor for Field RMA on items that can be fixed in the field. Serial #, if applicable, and Pictures are REQUIRED. Vendor will facilitate repair and/or request parts to be sent direct to the customer if needed.Chris800.456.7865EmailEnlace
WeatherTechWETFor missing parts or drop ship orders please contact Weathertech directlywholesale@weathertech.com6307691500EmailEnlace
WeiandWEITroubleshoot in field. See vendor website for warranty policiesCustomer Service800.638.0032EmailEnlace
Weigh SafeWSFRMA REQUIRED ON DEFECTIVE/WARRANTY ITEMS  EmailEnlace
Weld RacingWEL* Troubleshoot in field. * Serial # will need to be advised at the time of return request on good and defective returns. The serial # will be a white label located on the wheel beginning with an S and will include the part # as well on the label. * RMA is not required UNLESS returning to vendor direct such as drop shipment and special orders. * Drag wheels carry a 3yr limited structure warranty * Street & Strip carry a 3yr limited structure warranty see vendor website for warranty updates. http://www.weldracing.com/warranty/ 800.788.9353EmailEnlace
Westin AutomotiveWESPHOTOS ARE REQUIRED OF DAMAGES CUSTOMER may contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Stainless Steel Products for Rusting Tubes & Peeling we will need pictures sent to Returns Support at time of return request. Missing parts is not a warranty issue. Westin will Next Day missing parts if needed.Warranty/Customer Service626.960.6762EmailEnlace
Whelen Engineering Co., Inc.WHEContact autoorder@whelen.com for an rma. Repair only for warranty issues  EmailEnlace
Whirlpool CorporationWHLVendor RMA Required, Serial number is required, damaged product that has not been installed must be reported within 90days, undamaged product that needs to be returned needs to be reported with in 90days 8009522537EmailEnlace
WilwoodWLDMEYER REP must contact vendor for Field RMA. Min. 15% Restock Fee for Good Return parts. CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues. Replacement lids will need to be sent direct from vendor at no cost.customer service805.388.1188 x288EmailEnlace
WinegardWNGCustomer must contact the vendor to troubleshoot and obtain a Field RMA. Serial # will be required on applicable parts when requesting the field RMA. All returns will need the serial # verified with WNG as purchased from Meyer and noted on all Meyer RGA's Vendor will facilitate the return of the warranty parts and will advise if parts will be repaired in the field or if credit will be authorized. 1. Call Winegard Customer Service at 1-800-288-8094 or email returns@winegard.com 2. Provide your Meyer order number and request a product return to receive an RMA# 3. Using the RMA#, ship the product including all parts, packaging, accessories, warranty cards and manuals to: Winegard Technical Services Attn: RMA # _______________ 2736 Mount Pleasant Street Burlington, IA 52601 * Returns will not be accepted for any of the following reasons: • Packaging is missing, incomplete, damaged or defaced • Missing or damaged: accessories, warranty cards, manuals, etc. • Product is not in acceptable condition for resale (scratched, damage, etc.) • Electrical parts are not returnable if plugged in or unsealed for any reason • A rebate has been redeemed on the product • Special order products are non-returnable • Activated satellite receivers are non-returnable • No returns will be accepted without a return authorization numberTech Support / Returns Support800.788.4417 or 800.288.8094EmailEnlace
Wiper TechnologiesWIPWarranty covers defects only not wear time frame for defects is 90days, Return Support must contact vendor for RMA as they may issue either a field destroy or return to Meyer RMAGREGG EASH3363788331 ext 106EmailEnlace
Wolo Manufacturing Corp.WOLCUSTOMER must contact vendor to TROUBLESHOOT any FIT, or INSTALL issues. * 90 Day WARRANTY FROM DATE OF PURCAHSE FROM MEYER * Warranty DOES NOT cover water damage, rust, or misuse. Over 90 days Meyer Rep must contact vendor for a Field RMATara800.645.5808EmailEnlace
X-Force Exhaust USAXFCcustomer is supposed to contact X-Force for warranty issues, do not return to vendor unless approved.rob@xforceusa.com EmailEnlace
XK GlowXKGRMA required contact vendor for any warranty issues. 2176791915EmailEnlace
XS PowerPXSAn RGA (Return Goods Authorization) Number must be obtained first by phone (888) 4XS-POWER, fax (865) 281-9844, or by email. Returns will not be accepted without an RGA Number. All returns must be shipped freight prepaid to 2847 John Deere Dr. Suite 102, Knoxville, TN 37917JED EMERT EmailEnlace
YakimaYAKCUSTOMER must contact vendor to TROUBLESHOOT any WARRANTY issues. Vendor may coordinate WARRANTY pickups direct or send replacement parts to resolve. 888.925.4621EmailEnlace
Yukon Gear & AxleYUKMEYER REP must contact vendor for Field RMA for any WARRANTY issues via WEB link (contact support). CUSTOMER must contact vendor to TROUBLESHOOT any FIT or INSTALL issues.Customer Service/Tech Support800.347.1188 x 5774EmailEnlace
Z AutomotiveZATcustomer must contact vendor directly for any warranty or install issues they will need to include a copy of their invoice when doing so.Ian Schafer EmailEnlace
Zone OffroadZORCUSTOMER MUST CONTACT VENDOR DIRECTLY FOR ANY DEFECTIVE/WARRANTY/MISSING PARTS ISSUE. Photos are required of incorrect part, part label on box and picture of complete box. Customer contact vendor by email at tech-zone@ridefox.com  EmailEnlace
Export to Excel