Page 32 - Big End Performance 2014

STAINLESS STEEL BRAKE LINES
- Each line is constructed from smooth bore PTFE tube reinforced with a 308 stainless steel braided cover, allowing a firmer and faster brake pedal response
- -3 AN lines conform to DOT specs - Both -3 and -4 are available in both
straight/ straight, or straight/ 90 degree hose end configurations
BRAKE ADAPTER FITTINGS
-3AN to Pipe Adapters. Sold each
BEP22000 BEP22001 BEP22002
1/8” to #3 Straight 1/8” to #3 45 Degree 1/8” to #3 90 Degree
AN to Inverted Flare Adapter
Straight /Straight
BEP21209 BEP21212 BEP21215 BEP21218 BEP21221 BEP21224 BEP21230 BEP21236 BEP21242 BEP21248
#4, 9” #4, 12” #4, 15” #4, 18” #4, 21” #4, 24” #4, 30” #4, 36” #4, 42” #4, 48”
Straight /Straight
BEP22010 BEP22011 BEP22012
10MM Straight to #3 10MM 35 Degree to #3 10MM 90 Degree to #3
BEP22020 BEP22021 BEP22022 BEP22025 BEP22030
#3 to 3/8”-24, 2Pk Male #3 to 7/16”-24, 2Pk
#3 to 7/16”-20, 2Pk
#4 to 3/8”-24, 2Pk
#3 to 3/8”-24, 2Pk Female
-3AN Banjo Adapters. Sold each
BEP21009 BEP21012 BEP21015 BEP21018 BEP21020 BEP21024 BEP21030 BEP21036
#3, 9” #3, 12” #3, 15” #3, 18” #3, 20” #3, 24” #3, 30” #3, 36”
AN Flare Short Banjo Adapter
BEP22040 BEP22041
Banjo Bolts
BEP22070 BEP22071 BEP22072
#3 TO 10MM #4 TO 10MM
10MM X 1.25 10MM X 1.00 10MM X 1.50
Straight /90 Degrees
Straight /90 Degrees
-3 AN Flare Tee
BEP22050 #3 AN Flare Tee
Aluminum Crush Washers
BEP21109 BEP21112 BEP21115 BEP21118 BEP21120 BEP21124 BEP21130 BEP21136 BEP21142
#3, 9” #3, 12” #3, 15” #3, 18” #3, 20” #3, 24” #3, 30” #3, 36” #3, 42”
BEP21309 BEP21312 BEP21315 BEP21318 BEP21321 BEP21324 BEP21330 BEP21336 BEP21342
#4, 9” #4, 12” #4, 15” #4, 18” #4, 21” #4, 24” #4, 30” #4, 36” #4, 42”
BEP22060 BEP22061
10MM, 10 Pack 7/16”, 10 Pack
BILLET WHEELIE-BAR WHEELS
- Made from solid billet 6061-T6 aircraft grade material
- Molded with a polyurethane material that won’t dent or give like a rubber wheel can.
- Over a 10,000 lbs/ft. load capacity
- 4” O.D., 3/8” through hole for mounting. - Track tested over 4 years & run on
vehicles making over 1500HP.
BEP29100 Star Style Wheels BEP29105 Hole Style Wheels
PROPORTIONING VALVES
- Fixed designed after factory style valves.
- Perfect for conversions from drum to disc brakes
BEP20005 Disc/Disc, Brass BEP20007 Disc/Drum, Brass
31
ADJUSTABLE
PROPORTIONING VALVE
- Adjustable braking percentages - Billet anodized black aluminum - Easy finger-grip knob
- 1/8” Female pipe ports
- Includes inverted flare adapters
BEP20000 Adjustable Proportioning Valve
RESIDUAL VALVES
- Retain minimal fluid pressure by preventing drain back in the
brake lines in applications where
the master cylinder is
located below the calipers.
- 2 pound residual brake pressure valve is designed for
disc brakes while the 10 pound valve is used for drum brakes.
BEP20010 2 lbs, Blue BEP20012 10 lbs, Red
DRIVELINE