Page 563 - VSI Master Catalog

EXHAuST WRAP
• Thermo-Tec exhaust wraps will
not over-insulate a system when properly installed due to a proprietary coating, Thermal Conduction Technology (TCT), that conducts heat across the wrap’s surface. This coating controls heat build-up and dissipation.
THERMO-SLEEVE
• Ultra lightweight construction provides more insulating than traditional fiberglass.
• The aluminized sleeving reflects over 90% of radiant heat, and is fireproof and oil resistant. The Thermo-Sleeve can handle conductive heat temps of 750o F and radiant heat temperatures up to 2000o F.
THT11001 THT11002 THT11021 THT11022
Tan, 1” x 50’ Tan, 2” x 50’ Black, 1” x 50’ Black, 2” x 50’
THT11032 THT11051 THT11052
Copper, 2” x 50’ Tan, 1” x 15’ Tan, 2” x 15’
THT14005 THT14010 THT14015
3’ 1/4” - 1/2”
3’ 5/8" - 1”
3’ 1-1/8” - 1 1/2”
HI-HEAT COATING
HEAT-SLEEVE
• Made from braided fiberglass and coated with a compound silicone rubber. Capable of continuous protection to 500oF and short-term exposure thru 2200oF.
• To finish off a clean and well-protected insulating wrap, it is recommended to use the Hi-Heat Coating.
• Protects the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface.
THT18050 THT18051 THT18075 THT18076
1/2” x 3’, Black 1/2” x 3’, Silver 3/4” x 3’, Black 3/4” x 3’, Silver
THT12001 THT12002
Black, 11oz. Aluminum, 11oz.
THT18100 THT18101
1” x 3’, Black 1” x 3’, Silver
H.D. SPRAY ADHESIVE
• Fast-drying, quick-bond, high temp contact adhesive. THT12005 16.75 oz. Can
SNAP STRAPS
THERMO-GuARD FR
• Reduces sound, absorbs vibration, protects from heat and provides an extra layer of insulating padding.
• Stainless straps are used to secure exhaust insulating wrap – and more.
• 100% synthetic fiber felt provides sound and comfort control and a high-tech foil heat barrier that blocks more than 90% of radiant heat up to 1500o F.
THT13101
THT13150 THT13160
V8 Kit, 8-9” Straps,
4-18” Straps
V6 Kit, 6-9” Straps, 4-18” Straps 6 Pack, 6-18” Straps
THT14120 THT14125
48” x 72”, One Side Foil 48” x 72”, Two Side Foil
STARTER HEAT SHIELD
CLAMP-ON HEAT SHIELD
• Reflects over 90% of radiant heat up to 2000o F, adding life to the starter and assuring reliable starts.
• High-tech composite construction provides the ultimate in protection. Kits come complete with all clamps and new stainless stand offs.
THT11600 6” x 1’ Shield THT11620 6” x 2’ Shield
THT14150
7” x 22” Shield
HEAT-BARRIER
SuPRESSOR: ACOuSTICAL AND HEAT CONTROL MAT
• The Suppressor is ideal when both
• Made up of woven silica with a flexible aluminized finish.
sound and radiant heat control is needed. In addition to the polyethylene film, the foil surface provides direct protection from radiant heat.
• The highly reflective surface of the material is capable of withstanding radiant temps in excess of 2000°F.
THT14610 THT14620
36” x 24” 36” x 60”
THT13500 THT13575 THT14001
Adhesive-Backed, 12” x 12” Adhesive-Backed, 12” x 24” Aluminized (non-adhesive), 40” x 36”
THERMO-SHIELD
COOL AIR TuBE
• The lace on heat shield blocks
over 98% of the radiant heat of
the turbo and exhaust. Kit comes complete with 4 different color laces: blue, yellow, red and white.
THT14500 2-1/2” to 3-1/2” x 36”
• Adhesive-backed composite construction tape protects parts from over 90% of radiant heat up to 2000o F.
THT14002 1-1/2” x 15’ Roll
561