Page 480 - VSI Master Catalog

PERFECT LAUNCH DIFFERENTIAL COVERS
• These rear-end covers are made of lightweight but tough aluminum and have been specifi- cally designed to add strength to the rear housing case, particularly during heavy
torque situations. Covers include two bolts to stabilize bearing main caps, two magnetic drain plugs, and mounting bolts.
MANUAL PISTON RING FILER
• These piston ring filers enable the user to file piston rings quickly and accurately. Position the piston ring firmly against the dowel pins and turn the handle to rotate the abrasive wheel. Using a feeler gauge, file the piston rings to meet the manufacturer’s specifications.
PFM66668 PFM69502 PFM69501
GM, 10 Bolt GM, 12 Bolt Ford, 8.8
PFM66785 PFM66786
Manual Ring Filer
Replacement 120-Grit Grinding Wheel for PFM66785
HARMONIC BALANCER INSTALLER/PULLER
• These harmonic balancer puller and installer tools are equipped with a roller thrust bearing for easy installation. They may also be used for steering wheel installation and removal. Maximum recommended torque of 150 ft. lbs.
PFM66514 Harmonic Balancer Installer/Puller
HARMONIC BALANCER INSTALLATION TOOL
• These harmonic balancer tools make
installing the balancer simple; just
thread the proper end into the crank-
shaft and rotate the nut pressing the bear-
ing against the balancer. This in turn will slide the harmonic balancer onto the crankshaft smoothly.
PATENTED NO-MESSTM FUNNEL
• Prevent spills with a patented ball-n-hook design which shuts off flow and retains excess fluid when lifted.
PFM68068
Patented No-Mess
TM
Funnel
PFM66515
Harmonic Balancer Installation Tool
ELECTRIC PISTON RING FILER
• These electric piston ring filers file piston rings for proper end gap.They are powered by a rechargeable 12V battery and come with two 120-grit grinding wheels and a battery charger.
PFM66765 Electric Piston Ring Filer
PFM66762 Replacement Grinding Wheel for PFM66765
UNIVERSAL DEGREE WHEEL KIT
• Specifically designed for use with the cylinder heads on the engine block. Contains all the necessary tools to degree-in camshafts in
the most popular engines. Kit includes a 9" diameter degree wheel, a dial indicator, a
HEAVY DUTY PISTON INSTALLATION TOOL
• These piston installation tools allow you
to install pistons without damaging them. They are constructed from a nylon compos- ite material and weigh less than 2 lbs.
PFM67571 Piston Installation Tool
ADjUSTABLE RING COMPRESSOR
• Installing pistons with adjustable ring com- pressors is easy. Just put the connecting rod through, place the piston (with rings) into the tapered end of the ring compressor, tighten the compressor around the base of the piston, and then lay the compressor flat on the engine cylinder bore.
dial indicator mount, two valve check springs, a wire degree pointer and a detailed instruction manual.
PFM66766 PFM66767 PFM66768
4.000” - 4.090” Blue 4.125” - 4.205” Gold 4.205” - 4.310” Red
• These rod bolt stretch gauges will check rod bolts the proper way, because sometimes torque readings may vary. They include
a special high-tension spring that allows adjustability for bolts up to 2.75" long.
PFM66788 Rod Bolt Stretch Gauge
PUSH ROD LENGTH CHECKER
• These rod bolt stretch gauges will check rod bolts the proper way.
• Include a special high-tension spring that allows adjustability for bolts up to 2.75” long.
VALVE LASH WRENCH SET
• These valve lash adjusting wrenches make ad- justment very easy, cutting the adjusting time in half. Simply position the adjusting handle wrench over the rocker arm lockdown and
PFM66787
Universal Degree Wheel Kit
9" DEGREE WHEEL
• Used to locate top dead center or to check camshaft timing. They are manufactured from steel and then painted white with large, easy-to-read numbers. Includes detailed manual.
PFM66791
Universal Degree Wheel Kit
ROD BOLT STRETCH GAUGE
drop the appropriate T-handle down through the hole in the wrench.
PFM66778 PFM66779 PFM66780 PFM66781
478
1/2” with 3/16” and 1/8” 7/16” with 1/8”
9/16” with 3/16” and 7/32” 5/8” with 3/16” and 7/32”
PFM66789 PFM66790
3/8” Studs, Small Block 7/16” Studs, Small Block