Page 429 - VSI Master Catalog
P. 429
soFt touch reV control
• For use with points and OEM ignition, all MSD 5 and Blaster ignition systems
(non-CD ignitions).
• Plug-In 6,000, 7,000, and 8,000 modules are supplied.
• 50-State Legal via O.E. #D40-29!
MSD8728 Soft Touch Rev Control, Non CD Ignitions
retarD MoDules
• Packaged 5 degree modules on a card for use with MSD Timing Controls
MSD8774 Module Kit 11°, 12°, 13°, 14°, 15°
MSD8775 Module Kit 16°, 17°, 18°, 19°, 20°
MSD8776 Module Kit 5°, 6°, 7°, 8°, 9°, 10°
MSD8777 Module Kit 1°, 2°, 3°, 4°, 5°
MSD8773 0° Module
tach signal gMr PicKuP
• Clip to coil packs voltage wire to produce a common 12-volt signal for tach, shift light or RPM device.
• Connect to a diesel injector wire to provide an easy tach installation.
• Operates with 5-24 volt input for universal applications.
MSD8918 Tach Signal GMR Pickup
Digital Multi-retarD
rPM MoDule selector
• Plugs into the RPM module socket on all MSD Soft Touch Rev Controls.
• Select between 12 different RPM limits by turning a knob.
• Increments in 200 RPM.
MSD8670 3000-5200 RPM MSD8671 4600-6800 RPM MSD8672 6000-8000 RPM MSD8673 7600-9800 RPM MSD8674 9000-11000 RPM
retarD MoDule selector
• Plugs into the MSD 7 and 8 ignitions in the retard module port.
• Select between 12 different degrees of retard simply by turning a knob.
• Precise and accurate.
MSD8676 0°-11° of Retard MSD8678 0°, 10°-20° of Retard
aDjustaBle tiMing control
• Control your ignition from the driver’s seat. • Dash mounted knob allows you to adjust
up to 15° of ignition timing to compensate for changes in altitude, low octane, or heavy loads.
• Provides four different stages of retard. • Adjustable Start/Retard Feature.
• No modules!
• High speed microcontroller directs
• Increases gas mileage and performance, and prevents detonation.
• CARB Legal E.O. #D40-28
MSD8680 Adjustable Timing Control, 4-6-8 cylinder
Wiring DiagraMs & tech BooK
• Large full page wiring diagrams are very detailed to make it easy to trace or diagnose all your wiring procedures.
MSD9615 Wiring & Tech Book
starter saVer With signal staBiliZer
• Wires to your ignition with only 4 wires.
• Unit measures 1.5” x 3.5” x 2”.
• Retards timing 10-20° during cranking.
• Deactivated when engine reaches over 800 RPM.
MSD8984 Starter Saver with Signal Stabilizer
soFt touch electronic goVernor
• Perfect for commercial vehicle applications that operate under 5,000 RPM (i.e. delivery trucks).
• Protect against missed shift or drive- line failure and a good feature for driver
training applications.
MSD8725 Soft Touch Governor
all timing functions with extreme accuracy. MSD8975 Multi-Stage Retard
3-stage retarD
• Allows you to retard your ignition timing in three different stages.
• Controls the ignition retard in each stage of nitrous.
• Can also be used for a single or dual step retard.
MSD8970 3-Stage Retard
start / retarD control
• For Race Cars with locked out timing. • Eases cranking on engines.
• Choose from 10 to 25° of retard
during cranking
• Single stage retard for high RPM or
nitrous applications.
• Easy to install for 4-6-8 cylinder engines
with MSD Ignitions.
MSD8982 Start / Retard Control
427


































































































   427   428   429   430   431