Page 380 - VSI Master Catalog
P. 380
FABRICATED ALUMINUM VALVE COVERS
• Fabricated entirely from superior
CHROME PLATED STEEL VALVE COVERS
• Includes two breather/filler cap
quality aluminum, ultra-
grommets and one baffled and one non-baffled
PCV grommet.
lightweight.
• Tall enough to clear all
rocker combinations.
• Fasteners are included with each set and mount through
tubes welded directly to the valve covers to help maintain gasket-rail flatness and to prevent leaks.
Height
Additional
SB Chevy
MOR68392
Stock
Baffle in Oil Fill Hole, with Logo
Height
Additional
SB Chevy
MOR68326
Tall
Without Baffle, with Logo
BB Chevy
MOR68333
Tall
Without Baffle, with Logo
MOR68103
Tall
With Baffles, with Logo
BB Chevy 273-360
MOR68112
Tall
Without Baffles, with Logo
MOR68345 MOR68352
Stock Without Baffle, with Logo Tall Without Baffle, with Logo
MOR68102 MOR68113
MOR68181 MOR68201 MOR68131
MOR68301
Tall Without Baffles, with Logo
Tall With Built-in Baffle, with Logo
Tall With Baffles, with Logo
Tall With Baffles, with Logo Stock With Baffles, with Logo
Stock With Baffles, with Logo
LS Series
MOR68376
Stock
Without Baffle, with Logo
SB Chrysler 273-360, W2
MOR68161
Tall
With Baffles, with Logo
BB Chrysler 361-440
SB Ford Modular 4.6/5.4L
MOR68389
Tall
Without Baffle, with Logo
Ford 221-302, 351W
MOR68202
Tall
Without Baffles, with Logo
MOR68210
Tall
With Baffles, without Logo
Ford 429-460
Ford Boss 302, 351C, 351M, 400
MOR68121
Stock
With Baffles, with Logo
Oldsmobile 330-455
PERM-ALIGN
VALVE COVER GASKETS • Manufactured from
Pontiac 301-455
MOR68281
Tall
With Baffles, with Logo
40 durometer rubber, molded
over and vulcanized to a rigid steel frame.
• The extra-strength design will not leak, blow out or get sucked in like stock or inferior-quality aftermarket gaskets.
• Oil-resistant.
• Full 3/16”-thick.
• Two Per Package.
BULLET NOSE VALVE COVER STUD KIT
• Bullet nose tip makes it easy to start mounting nuts.
• Prevents Small Block Chevy cast aluminum valve covers from vibrating loose in competition.
• Includes eight 1/4”-20 x 1-1/2” heat-treated studs, nylon-insert lock nuts and washers.
MOR68830 Bullet Nose Valve Cover Stud Kit MOR68831 Bullet Nose Valve Cover Stud Kit, 12 pt. Nut NOTE: Will Not work with Stamped Aluminum Valve Covers
VALVE COVER ACORN NUTS
• Add a decorative touch to engines in cases where long valve cover wing nuts are impractical.
MOR93020 MOR93021
SBC, Fits Moroso Valve Covers and Others Fits 18°, 16°, 15°, 13.5° and 12° Dart, Brodix, Edelbrock and All Pro Cylinder Heads
BBC, Fits Moroso Valve Covers and Others BB Chrysler
Ford 221-302 and 351W, Fits Moroso Valve Covers BB Ford
MOR93040
MOR93055
MOR93060
MOR93065
NOTE: Modifications required for Moroso Valve Covers MOR68329 and MOR68417
VALVE COVER HEX HEAD NUTS
• Use when space is critical or if the valve cover nuts must be snugged down tighter than wing-nut-finger-tight.
• Four per package with 1/4”-20 x 1-3/8” studs included.
• Install and remove with half inch socket wrench with extension or a speed handle.
MOR68550 1/2” Hex Head, 3-7/8” Long, Chrome Plated Steel
• Fits SBC or any valve cover using 1/4”-20 hold downs. • Set includes eight 1-3/8” high nuts and 1/4”-20 x
378
1-3/8” studs.
MOR68561 Valve Cover Acorn Nuts, Chrome